Meridian America D-ILA 1080MF1 operation manual

Page 7

To avoid damage to the cabinet, please ob- serve the following precautions:

•Do not clean with an abrasive cloth or cleaner

•Do not use excessive force when cleaning

•Do not attempt to clean the unit with paint thinner, benzene or other solvents that may at- tack the enclosure.

•Do not spray volatile chemicals such as insecti- cide on the unit

•Do not allow prolonged contact with rubber or plastic products

Dirt on the lens should be removed using commercial blowers, lens cleaning papers or microfibre cloths (designed for cleaning glasses and cameras). Do not use fluid-type clean- ing agents, as this may lead to peeling of the surface coating film. The lens surface is fragile: avoid rubbing it hard or knocking it.



Page 6 Page 8
Image 7
Page 6 Page 8
Contents ILA 1080MF1 For Customer use FCC Information U.S.A. only Safety precautionsMachine Noise Information Germany only Product If in DOUBT, Consult a Competent Electrician Other Countries outside the European Union Maintenance ProceduresInformation for Users on Disposal of Old Equipment EU Only European UnionPage Contents Accessories Controls & Features Handling the Control Panel Cover AC Power Input SocketService Connector Rear & Right SideExit Button Rx/Tx IndicatorsControl Panel Menu ButtonTemp Indicator IndicatorsStandby Indicator Operate IndicatorLamp replacement Indicator Display TableTop panel indicators Control panel indicatorsOFF Button Remote ControlProjector/Processor Select buttons On ButtonLight Button Test Button main labelZoom Tele/Wide Buttons main labels 8 Installing the Projector View from the side Projector and Screen InstallationView from Above Wide T Tele Screen Size and Projection DistanceProjection screen position image according to shift level Lens Shift SettingAdjust the projection screen position Re-fit the lens shift coverInterfacing the Projector Connecting to DevicesConnecting a Video Processor Connecting a computer or Home Automation System via RS232Connecting the Power Cable Supplied Precautions During Use Adjusting zoom image size and focusTurning off the power Apply Mains PowerMenu Structure Adjustments and Settings Using MenusAfter setting is completed, press the Exit button Accessing the Menus Press the Menu buttonMenu Operation Buttons Red, Green, Blue Pixel AdjustSetup Menu Menu Position Color TempRC232C bps Power SaveOptions Menu Menu Display Sleep TimeAbout Lamp Replacement When the lamp usage time reaches 2010 hoursReplacing the Lamp Pull out the lamp unit Lamp Replacement Procedure Remove the control panel coverLoosen the screw and remove the lamp cover Loosen the screws on the lamp unit and lift up the handleRe-attach the lamp cover and fasten the screw Tighten the screws of the lamp unit and fold down the handleCleaning and Replacing the Filter On-screen warning messages For Nos About warning indicatorsPower up TroubleshootingPinouts RS-232C Port Interface SocketsDVI-D Interface RS-232C External Control Numeric value External control command tableSpecial parameters Specifications All dimensions in millimetres Projector Dimensions
Top Page Image Contents