Meridian America D-ILA 1080MF1 Lamp Replacement Procedure Remove the control panel cover

Page 28

Lamp Replacement Procedure

1 Remove the control panel cover

• See page 10 for details on removing the control panel cover.

Control Panel Cover

2 Loosen the screw and remove the lamp cover

• Undo the retaining screw with a ‘+’ screwdriver.

Lamp Cover

Handle

3 Loosen the screws on the lamp unit and lift up the handle

• Loosen the 2 screws with a ‘+’ screwdriver.

4 Pull out the lamp unit

Lamp Unit

Image 28

Contents ILA 1080MF1 For Customer use FCC Information U.S.A. only Safety precautionsMachine Noise Information Germany only Product If in DOUBT, Consult a Competent Electrician Maintenance Procedures Information for Users on Disposal of Old Equipment EU OnlyEuropean Union Other Countries outside the European UnionPage Contents Accessories Controls & Features AC Power Input Socket Service ConnectorRear & Right Side Handling the Control Panel CoverRx/Tx Indicators Control PanelMenu Button Exit ButtonIndicators Standby IndicatorOperate Indicator Temp IndicatorIndicator Display Table Top panel indicatorsControl panel indicators Lamp replacementRemote Control Projector/Processor Select buttonsOn Button OFF ButtonLight Button Test Button main labelZoom Tele/Wide Buttons main labels 8 Installing the Projector View from the side Projector and Screen InstallationView from Above Screen Size and Projection Distance Wide T TeleLens Shift Setting Adjust the projection screen positionRe-fit the lens shift cover Projection screen position image according to shift levelConnecting to Devices Connecting a Video ProcessorConnecting a computer or Home Automation System via RS232 Interfacing the ProjectorConnecting the Power Cable Supplied Adjusting zoom image size and focus Turning off the powerApply Mains Power Precautions During UseAdjustments and Settings Using Menus Menu StructureAfter setting is completed, press the Exit button Accessing the Menus Press the Menu buttonMenu Operation Buttons Pixel Adjust Setup Menu Menu PositionColor Temp Red, Green, BluePower Save Options Menu Menu DisplaySleep Time RC232C bpsAbout Lamp Replacement When the lamp usage time reaches 2010 hoursReplacing the Lamp Lamp Replacement Procedure Remove the control panel cover Loosen the screw and remove the lamp coverLoosen the screws on the lamp unit and lift up the handle Pull out the lamp unitTighten the screws of the lamp unit and fold down the handle Re-attach the lamp cover and fasten the screwCleaning and Replacing the Filter On-screen warning messages About warning indicators For NosTroubleshooting Power upPinouts RS-232C Port Interface SocketsDVI-D Interface RS-232C External Control Numeric value External control command tableSpecial parameters Specifications Projector Dimensions All dimensions in millimetres