3 Options Menu
Menu Display
Adjusts the display duration of the menu screen.
Setting Values: 15sec, On
Default Value: 15sec
•The menu screen display will not disappear au- tomatically when this is set to On. Instead, press the EXIT button to clear the menu screen.
Sleep Time
Sets the length of time after cessation of video input before automatically switching the unit to the standby mode
Setting Values (min): 15, 30, 60, Off
Default Value: Off
RC232C (bps)
Sets the data rate when communicating via the
Default Value: 19200
Zoom/Focus
Locks/Unlocks the power zoom/power focus functions of the projection lens.
Setting Values: Lock, Unlock
Default Value: Unlock
Power Save
Lowers the power (brightness) of the lamp. Setting Values: On, Off
Default Value: Off
•Lowering the brightness of the lamp (Power Save On) will save power, but needless to say the image will not be as bright.
•Adjustment of settings will be disabled for about 1 minute after the setting is changed. Wait a minute before trying to make further adjustments.
•Altering the Power Save setting does not affect the lamp usage time (lamp life) of the light- source.
4 Information Menu
•Options under this menu show information only: no settings are available.
Lamp Time
Displays the accumulated hours of usage of the
Source
Automatically identifies the input video signal at the projector’s DVI input, and displays the signal name (‘1080p50’ or ‘1080p60’).
•No signal name will be displayed if no signal is present, or if the signal is not one of the above types (‘Out of range’ will be displayed in the lat- ter case).
NOTES:
•When the input video signal is switched, a blue screen will appear for about 2 seconds.
•When nothing is connected to the [DVI] termi- nal, or if there is no video signal, a ‘No Signal
•In the case of a video signal that cannot be used with this unit, an ‘Out of Range’ message will be projected.
•Video input signals that can be used with this unit are 1080/50p and 1080/60p signals via the
26