Meridian America D-ILA 1080MF1 operation manual Safety precautions, FCC Information U.S.A. only

Page 3

Safety precautions

IMPORTANT INFORMATION

NOTICE

This product has a High Intensity Discharge (HID) lamp that contains a small amount of mercury. It also contains lead in some com- ponents. Disposal of these materials may be regulated in your community due to environ- mental considerations. For disposal or recycling information please contact your local authori- ties.

WARNING: TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

WARNING: THIS APPARATUS MUST BE EARTHED.

CAUTION: To reduce the risk of electric shock, do not remove cover. Refer servicing to quali- fied service personnel.

This projector is equipped with a 3-pin earthed (grounded) plug. If you are unable to insert the plug into the outlet, contact your electrician.

FCC INFORMATION (U.S.A. only)

CAUTION: Changes or modification not ap- proved by Meridian could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for Class B digital devices, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interfer- ence in a residential installation. This equip- ment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interfer- ence will not occur in a particular installation. If this equipment does cause harmful interfer- ence to radio or television reception, which can be determined by turning the equipment

off and on, the user is encourage to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equip- ment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/ TV technician for help.

MACHINE NOISE INFORMATION (Germany only)

Machine Noise Information Ordinance 3. GSGV, January 18, 1991: The sound pressure level at the operator position is equal or less than 70 dB (A) according to ISO 7779.

Avoid burning-in of the D-ILA device Do not allow the same still picture to be pro- jected for a long time or an abnormally bright video picture to be projected. Do not project video images with high-intensity or high con- trast on a screen. The video image could be burnt into the D-ILA device.

Use special care when projecting video games or computer program images. There is no problem with ordinary videocassette playback images.

Installation location considerations Do not install the projector in a location that cannot support its weight securely.

If the installation mounting is not sturdy enough, the projector could fall or overturn, possibly causing personal injury.

IMPORTANT SAFEGUARDS

This unit has been engineered and manufac- tured to ensure your personal safety under normal operating conditions. However, IM-

PROPER USE CAN RESULT IN POTENTIAL ELEC- TRICAL SHOCK OR FIRE HAZARD. In order not to defeat the safeguards incorporated into this product, observe the following basic rules for its installation, use and service. Please read these Important Safeguards carefully before use.



Image 3
Contents ILA 1080MF1 For Customer use Safety precautions FCC Information U.S.A. onlyMachine Noise Information Germany only Product If in DOUBT, Consult a Competent Electrician Other Countries outside the European Union Maintenance ProceduresInformation for Users on Disposal of Old Equipment EU Only European UnionPage Contents Accessories Controls & Features Handling the Control Panel Cover AC Power Input SocketService Connector Rear & Right SideExit Button Rx/Tx IndicatorsControl Panel Menu ButtonTemp Indicator IndicatorsStandby Indicator Operate IndicatorLamp replacement Indicator Display TableTop panel indicators Control panel indicatorsOFF Button Remote ControlProjector/Processor Select buttons On ButtonTest Button main label Light ButtonZoom Tele/Wide Buttons main labels 8 Installing the Projector Projector and Screen Installation View from the sideView from Above Wide T Tele Screen Size and Projection DistanceProjection screen position image according to shift level Lens Shift SettingAdjust the projection screen position Re-fit the lens shift coverInterfacing the Projector Connecting to DevicesConnecting a Video Processor Connecting a computer or Home Automation System via RS232Connecting the Power Cable Supplied Precautions During Use Adjusting zoom image size and focusTurning off the power Apply Mains PowerMenu Structure Adjustments and Settings Using MenusAccessing the Menus Press the Menu button After setting is completed, press the Exit buttonMenu Operation Buttons Red, Green, Blue Pixel AdjustSetup Menu Menu Position Color TempRC232C bps Power SaveOptions Menu Menu Display Sleep TimeWhen the lamp usage time reaches 2010 hours About Lamp ReplacementReplacing the Lamp Pull out the lamp unit Lamp Replacement Procedure Remove the control panel coverLoosen the screw and remove the lamp cover Loosen the screws on the lamp unit and lift up the handleRe-attach the lamp cover and fasten the screw Tighten the screws of the lamp unit and fold down the handleCleaning and Replacing the Filter On-screen warning messages For Nos About warning indicatorsPower up TroubleshootingInterface Sockets Pinouts RS-232C PortDVI-D Interface RS-232C External Control External control command table Numeric valueSpecial parameters Specifications All dimensions in millimetres Projector Dimensions