Meridian America D-ILA 1080MF1 Adjustments and Settings Using Menus, Menu Structure

Page 23

Adjustments and Settings Using Menus

The menus displayed on the screen are used to perform adjustment and setting for this unit.

Menu Structure

The menus of this unit have the following structure. Characters on the screen are displayed in Eng- lish only.

NOTE: Press the ENTER button to switch to the test pattern image. There are 10 types of test pat- terns. Press the ENTER or TEST button to alter the test pattern to be projected. Press the EXIT but- ton to clear the menu screen. Press the EXIT button again to clear the test pattern.

Image 23

Contents ILA 1080MF1 For Customer use Machine Noise Information Germany only Safety precautionsFCC Information U.S.A. only Product If in DOUBT, Consult a Competent Electrician Other Countries outside the European Union Maintenance ProceduresInformation for Users on Disposal of Old Equipment EU Only European UnionPage Contents Accessories Controls & Features Handling the Control Panel Cover AC Power Input SocketService Connector Rear & Right SideExit Button Rx/Tx IndicatorsControl Panel Menu ButtonTemp Indicator IndicatorsStandby Indicator Operate IndicatorLamp replacement Indicator Display TableTop panel indicators Control panel indicatorsOFF Button Remote ControlProjector/Processor Select buttons On ButtonZoom Tele/Wide Buttons main labels 8 Test Button main labelLight Button Installing the Projector View from Above Projector and Screen InstallationView from the side Wide T Tele Screen Size and Projection DistanceProjection screen position image according to shift level Lens Shift SettingAdjust the projection screen position Re-fit the lens shift coverInterfacing the Projector Connecting to DevicesConnecting a Video Processor Connecting a computer or Home Automation System via RS232Connecting the Power Cable Supplied Precautions During Use Adjusting zoom image size and focusTurning off the power Apply Mains PowerMenu Structure Adjustments and Settings Using MenusMenu Operation Buttons Accessing the Menus Press the Menu buttonAfter setting is completed, press the Exit button Red, Green, Blue Pixel AdjustSetup Menu Menu Position Color TempRC232C bps Power SaveOptions Menu Menu Display Sleep TimeReplacing the Lamp When the lamp usage time reaches 2010 hoursAbout Lamp Replacement Pull out the lamp unit Lamp Replacement Procedure Remove the control panel coverLoosen the screw and remove the lamp cover Loosen the screws on the lamp unit and lift up the handleRe-attach the lamp cover and fasten the screw Tighten the screws of the lamp unit and fold down the handleCleaning and Replacing the Filter On-screen warning messages For Nos About warning indicatorsPower up TroubleshootingDVI-D Interface Interface SocketsPinouts RS-232C Port RS-232C External Control Special parameters External control command tableNumeric value Specifications All dimensions in millimetres Projector Dimensions