Meridian America D-ILA 1080MF1 operation manual For Customer use

Page 2

For Customer use :

Enter the serial number of your unit – located on the side panel of the cabinet – below. Retain this information for future reference.

Image 2
Contents ILA 1080MF1 For Customer use Machine Noise Information Germany only Safety precautionsFCC Information U.S.A. only Product If in DOUBT, Consult a Competent Electrician European Union Maintenance ProceduresInformation for Users on Disposal of Old Equipment EU Only Other Countries outside the European UnionPage Contents Accessories Controls & Features Rear & Right Side AC Power Input SocketService Connector Handling the Control Panel CoverMenu Button Rx/Tx IndicatorsControl Panel Exit ButtonOperate Indicator IndicatorsStandby Indicator Temp IndicatorControl panel indicators Indicator Display TableTop panel indicators Lamp replacementOn Button Remote ControlProjector/Processor Select buttons OFF ButtonZoom Tele/Wide Buttons main labels 8 Test Button main labelLight Button Installing the Projector View from Above Projector and Screen InstallationView from the side Screen Size and Projection Distance Wide T TeleRe-fit the lens shift cover Lens Shift SettingAdjust the projection screen position Projection screen position image according to shift levelConnecting a computer or Home Automation System via RS232 Connecting to DevicesConnecting a Video Processor Interfacing the ProjectorConnecting the Power Cable Supplied Apply Mains Power Adjusting zoom image size and focusTurning off the power Precautions During UseAdjustments and Settings Using Menus Menu StructureMenu Operation Buttons Accessing the Menus Press the Menu buttonAfter setting is completed, press the Exit button Color Temp Pixel AdjustSetup Menu Menu Position Red, Green, BlueSleep Time Power SaveOptions Menu Menu Display RC232C bpsReplacing the Lamp When the lamp usage time reaches 2010 hoursAbout Lamp Replacement Loosen the screws on the lamp unit and lift up the handle Lamp Replacement Procedure Remove the control panel coverLoosen the screw and remove the lamp cover Pull out the lamp unitTighten the screws of the lamp unit and fold down the handle Re-attach the lamp cover and fasten the screwCleaning and Replacing the Filter On-screen warning messages About warning indicators For NosTroubleshooting Power upDVI-D Interface Interface SocketsPinouts RS-232C Port RS-232C External Control Special parameters External control command tableNumeric value Specifications Projector Dimensions All dimensions in millimetres