Gateway 9250C manual Embedded Web server sections, Tab or section Options

Embedded Web server sections

Tab or section	Options
Information tab	● Device Status: Shows the device status. To change the default settings, click
Provides device, status, and	Change Settings.
configuration information	● Configuration Page: Shows the information found on the configuration page.
	● Supplies Status: Shows supplies ordering and recycling information. To order new
	supplies, click Shop for Supplies in the Other Links area on the left side of the
	window.
	● Event log: Shows a list of all device events and errors.
	● Usage page: Shows a summary of the number of pages the device has scanned,
	grouped by size and type.
	● Device Information: Shows the device network name, address, and model
	information. To change these entries, click Device Information on the Settings tab.
	● Control Panel: Shows messages from the device control panel, such as Ready or
	Sleep mode on.
Settings tab	● Configure Device: Allows you to configure device settings. This page contains the
Provides the ability to configure the	traditional menus found on devices using a control-panel display.
	● E-mail Server: Used in conjunction with the Alerts page to set up incoming and
device from your computer
	outgoing e-mail, as well as to set e-mail alerts.
	● Alerts: Allows you to set up to receive e-mail alerts for various device and supplies
	events.
	● AutoSend: Allows you to configure the device to send automated e-mails regarding
	device configuration and supplies to specific e-mail addresses.
	● Security: Allows you to set a password that must be entered to gain access to the
	Settings and Networking tabs. Enable and disable certain features of the
	embedded Web server.
	● Authentication Manager: Allows you to set the device functions that require users
	to successfully log in before use.
	● LDAP Authentication: Allows you to configure the digital sender to authenticate
	against an LDAP server.
	● Kerberos Authentication: Allows you to configure the digital sender to authenticate
	against a Kerberos Domain Controller.
	● Edit Other Links: Allows you to add or customize a link to another Web site. This
	link is displayed in the Other Links area on all embedded Web server pages.
	● Device Information: Allows you to name the device and assign an asset number to
	it. Enter the name and e-mail address for the primary contact who will receive
	information about the device.
	● Language: Allows you to determine the language in which to display the embedded
	Web server information.
	● Date & Time: Allows time synchronization with a network time server.
	● Wake Time: Allows you to set or edit a wake time for the device.

54 Chapter 5 Manage and maintain the device ENWW