Gateway 9250C Error To continue turn off then on, Xxxx Error To continue turn off then, Then on

Page 80

Table 6-1Control-panel messages (continued)

Control panel message	Description	Recommended action

54.XX ERROR To continue turn off then on	A temporary error has occurred.	Turn the device off, and then turn the device
		on.
		If this message persists, contact an HP-
		authorized service or support provider. (See
		the HP support flyer, or go to www.hp.com/
		support/9250c.)

57.X ERROR To continue turn off then on	A temporary error has occurred.	Turn the device off, and then turn the device
		on.
		If this message persists, contact an HP-
		authorized service or support provider. (See
		the HP support flyer, or go to www.hp.com/
		support/9250c.)

58.XX ERROR To continue turn off then on	A temporary error has occurred.	Turn the device off, and then turn the device
		on.
		If this message persists, contact an HP-
		authorized service or support provider. (See
		the HP support flyer, or go to www.hp.com/
		support/9250c.)

59.XY ERROR To continue turn off then on	A temporary error has occurred.	Turn the device off, and then turn the device
		on.
		If this message persists, contact an HP-
		authorized service or support provider. (See
		the HP support flyer, or go to www.hp.com/
		support/9250c.)

79.XXXX ERROR To continue turn off then	A critical hardware error occurred.	Turn the device off, and then turn the device
on		on.
		If this message persists, contact an HP-
		authorized service or support provider. (See
		the HP support flyer, or go to www.hp.com/
		support/9250c.)

8X.YYYY EIO ERROR To continue turn off	The EIO accessory card has encountered a	Try the following actions to clear the
then on	critical error, as specified by YYYY.	message.
		1.	Turn the device off, and then turn the
			device on.
		2.	Turn the device off, reinstall the EIO
			accessory, and then turn the device on.
		3.	Replace the EIO accessory.

8X.YYYY EMBEDDED JETDIRECT ERROR	The embedded HP Jetdirect print server has	Turn the device off, and then turn the device
To continue turn off then on	encountered a critical error, as specified by	on.
	YYYY.	If this message persists, contact an HP-
		If this message persists, contact an HP-
		authorized service or support provider. (See
		the HP support flyer, or go to www.hp.com/
		support/9250c.)

Access denied menus locked	The control panel function that you are trying	Contact the network administrator.
	to use has been locked to prevent
	unauthorized access.

72 Chapter 6 Problem solving

ENWW

Image 80

Contents Page Page HP 9250C Digital Sender Copyright information Trademark CreditsTable of contents Use device features Problem solving Index Device basics Device information Where to get more informationFeature Description For more information Features Mode Dots per inch dpi Speed ipm, A4 Speed ipm, letter PerformanceADF performance Duty cycleDevice software Digital-sender softwareNetwork components used for digital-sending Component DescriptionPaper handling Device parts 4214 456Device parts Space requirements Control panel Reset button Use the control panelControl-panel layout Data lightHome screen Control-panel help system on Buttons on the touchscreenControl-panel help system Menu item Sub-menu item Values Description Navigate the Administration menuInformation menu Default Job Options menu Default Options for OriginalsImage Adjustment Menu item Values DescriptionDefault E-mail Options Document File Type Choose the file format for the e-mailDefault Send to Folder Options 150 DPI default Smaller files 200300 400Time/Scheduling menu Management menu Sleep mode DisableUse Sleep Delay default Menu item Sub-menu item Values and Description Initial Setup menuNetworking and I/O Manual Settings Default IPIPV6 Settings Enable Dhcp ReleaseManual Settings Use the Manual Settings menu to Diagnostics Embedded TestDHCPV6 Policy Proxy ServerLAN HW Test Http TestSnmp Test Select All TestsPing Test Dest TypeDest IP Packet SizePing Results Packets SentPackets Received Percent LostEnww Mail Setup Send Setup menuInactivity Timeout Device Behavior menuLanguage Keyboard LayoutService menu Troubleshooting menuResets menu Connectivity Novell NetWare support Network configuration Configure TCP/IPv4 parametersSet the subnet mask Configure TCP/IPv6 parameters HP Jetdirect EIO print serversEnww Use device features Load the automatic document feeder ADF Load mediaLoad media on the scanner glass Load media Use the keyboard Change settings for the current job Basic send informationLog Button DescriptionCancel send Supported protocols Configure the device to send e-mailConfigure e-mail server settings Test the Smtp settings Find gatewaysSend a document Send an e-mailUse the Send E-mail screen Use the auto-complete function Use the address bookUse the local address book Scan to a folder Scan to a workflow destination Send a digital fax Manage and maintain the device Description How to view ConfigurationUse information pages UsageOpen the embedded Web server by using a network connection Use the embedded Web serverEmbedded Web server sections Tab or section OptionsOther links Digital Sending tabNetworking tab Use HP Web Jetadmin software Network authentication Restrict software accessControlling digital-sending security Secure e-mailReplace the mylar sheet Replace the ADF Maintenance KitReplace supplies and parts Touch Reset Supplies Touch New Document Feeder Kit Clean the device Clean the exteriorClean the glass Clean the touchscreenClean the ADF rollers Enww Enww Download new firmware from the HP Web site Upgrade the firmwareDetermine the current level of firmware Upgrade the firmware Use a USB connection to upgrade the device firmware Use HP Web Jetadmin to upgrade the firmwareUpgrade the HP Jetdirect Inside firmware Touch Troubleshooting Calibrate the scannerProblem solving Sources for information about problems Resolve problems. See Troubleshooting menu onSender. See Use HP Web Jetadmin software on page 56 for Source DescriptionControl-panel messages Control-panel message typesResolve control-panel messages Message type DescriptionError To continue turn off then on Xxxx Error To continue turn off then8X.YYYY EIO Error To continue turn off Access denied menus lockedAuthentication Required Authentication Required To Use ThisFeature Digital send communication errorSending. Contact administrator Novell Login RequiredPassword or name is incorrect. Please Enter correct loginClear jams JamsAvoid jams Close the ADF cover Problem solving Validate the Ldap gateway address Solve e-mail problemsValidate the e-mail server Smtp gateway address Enww Service and support Hewlett-Packard limited warranty statementAppendix a Service and support Customer self repair warranty service Hewlett-Packard limited warranty statement for software Availability of support and service HP maintenance agreements Next-Day Onsite ServiceSpecifications Physical specifications Electrical specificationsPower consumption specifications Height Depth Width WeightEnvironmental specifications Sound Power Level Declared per ISO 9296Acoustic emissions Recommended Operating StorageEnww Regulatory information FCC regulations Environmental Product Stewardship program Material Safety Data Sheet Msds For more information Conforms to the following Product Specifications Declaration of conformityDeclaration of Conformity Supplementary InformationVcci statement Japan EMI statement Korea Country-/region-specific safety statementsCanadian DOC regulations Index ADFFTP RFU Windows 2000 fax Index