www.ti.com
DDR2 Memory Controller Registers
4.8DDR2 Memory Controller Control Register (DMCCTL)
The DDR2 memory controller control register (DMCCTL) resets the interface logic of the DDR2 memory controller. The DMCCTL is shown in Figure 27 and described in Table 25.
Figure 27. DDR2 Memory Controller Control Register (DMCCTL)
31 |
|
|
|
|
| 16 |
| Reserved |
|
|
|
|
|
|
|
|
|
|
| |
15 | 6 | 5 | 4 | 3 | 2 | 0 |
|
| IF |
|
|
|
|
Reserved |
| RESE | Rsvd | Rsvd |
| RL |
|
| T |
|
|
|
|
| R/W- | R/W- |
| |||
|
| 0x1 | 0x0 |
|
|
|
LEGEND: R/W = Read/Write; R = Read only;
Table 25. DDR2 Memory Controller Control Register (DMCCTL) Field Descriptions
Bit | Field | Value | Description |
Reserved |
| Reserved. Writes to this register must keep this field at its default value. | |
Reserved |
| Reserved. Writes to this register must keep this field at its default value. | |
5 | IFRESET |
| DDR2 memory controller interface logic reset. The interface logic controls the signals used to |
|
|
| communicate with DDR2 SDRAM devices. This bit resets the interface logic. The status of this |
|
|
| interface logic is shown on the DDR2 memory controller status register. |
|
| 0 | Release reset. |
|
| 1 | Assert reset. |
4 | Reserved |
| Reserved. Writes to this register must keep this field at its default value. |
3 | Reserved |
| Reserved. The reserved bit location is always read as 0. A value written to this field has no effect. |
RL |
| Read latency bits. These bits must be set equal to the CAS latency plus 1. |
SPRUF85 | DSP DDR2 Memory Controller | 45 |
Submit Documentation Feedback |
|
|