Volume Adjustment
To adjust the volume, do the following:
>If you are using a headset, adjust the intercom listen level with the left Volume control on the front panel of the MS- 2002.
OR
If you are using a speaker, adjust the intercom listen level with the right Volume control next to the speaker. External speakers require their own volume controls.
Receiving Calls
When there is an incoming call signal on a channel, the Call key for that channel flashes red. There is also a beep tone if the beep feature has been activated (page 14).
To receive calls, do the following:
1.Activate the microphone.
a.If you are using a
OR
If you are using a
NOTE: For more information about the
2.Turn on the Talk and Listen keys for the calling channel and begin your conversation.
3.Turn off the keys when finished.
NOTE: When you tap the Headset key, or the Panel Mic key, or any Talk or Listen key, it locks in the on position. You can then tap the key again to turn it off. For momentary activation, press and hold the key. It remains on as long as you hold it and turns off when you release it.
Call an Intercom Channel
To call an intercom channel, do the following:
1.Press and hold the Call key for the channel you want to call.
An inaudible call signal is sent, and your listen key for the channel is automatically turned on in preparation to receive a verbal response.
2.When you hear a response, release the Call key.
3.If you are using manual microphone activation instead of VOX, make sure your microphone is on.
OR
For a dynamic mic headset, tap the Panel Mic key to turn it on.
4.Turn on the Talk key for the channel you called to begin your conversation.
5.Turn off the Talk and Listen keys to end the conversation.
Microphone Mute During Talk
You can mute the microphone while talking.
To mute the microphone during talk, do the following:
1.Tap either the Headset key or the Panel Mic key, whichever is currently being used.
2.Tap the key again to turn the microphone back on. (If you are using VOX, tap the key twice to reactivate VOX.)
12