Sharp XE-A201 Cleaning the Print Head, Removing the Drawer, Opening the Drawer by Hand

Page 68

7Cleaning the Print Head

When the printed text is getting dark or faint, paper dust may be stuck to the print head. Clean the print head as

follows:

Roller

Print head

Caution:

Never touch the print head with a tool or anything hard as it may damage the head.

The paper cutter is mounted on the cover. Be careful not to cut yourself.

1.Turn the mode switch to the OFF position.

2.Remove the printer cover.

3.Remove the inner cover that protects the printer. (Press the lever located both sides and lift the cover up.)

4.Pull the print head release lever toward you (to the head-up position). (Refer to the drawing on page 62.)

5.Clean the print head with a cotton swab or soft rag moistened with ethyl alcohol or isopropyl alcohol.

6.Return the print head release lever to its original position immediately after cleaning.

7.Replace the inner cover. (Insert the side tabs of the cover into their slots and press the cover in the printer until it is properly seated.)

8.Reset the paper roll correctly by following the steps in “Installing the paper roll”.

8

Removing the Drawer

 

 

The drawer in the register is detachable. After closing your business for the

 

Coin case

day, remove the drawer. To detach the drawer, pull it forward fully, and

 

 

remove it by lifting it up. The 5-denomination coin case is detachable.

9

Opening the Drawer by Hand

 

The drawer automatically opens. However, when a power failure occurs or the

 

machine becomes out of order, slide the lever located on the bottom of the

 

machine in the direction of the arrow. (See the figure at the left.)

 

The drawer will not open if it is locked with the drawer lock key.

 

Lever

66

Image 68
Contents Electronic Cash Register Caja Registradora Electronica Illustration above is a screen of Acrobat Reader For Your Records Contents Correction After Finalizing a Transaction Void mode Basic Function Programming For Quick StartParts and Their Functions External View Front viewPrinter Print head release leverMode Switch and Mode Keys Keyboard layoutKey names 11 MMachine state symbols DisplaysDrawer Lock Key Operator display Customer display Pop-up typeGetting Started Be careful with the paper cutter, so as not to cut yourselfInstalling a paper roll Date Time Tax When not using the take-up spool using as receipt paperWhen using the take-up spool using as journal paper Starting sales entries Things to do after you close your store Things to do before you start sales entriesThings you can do for sales entries Basic Sales Entry Basic Sales Entry Example1500 5000Error Warning Power Save ModeError escape function Clerk assignmentPLU/subdepartment entries Item Entries Single item entriesDepartment entries Repeat entries Multiplication entriesSplit pricing entries Finalization of Transaction Cash or check tendering Single item cash sale Sics entryDisplaying Subtotals 300 + Cash or check sale that does not require entryCharge credit sale Mixed-tender sale800 50 t 725 515 Ts t Us tTax Calculation Automatic tax Manual tax25 TUp 400 U Tax status shift1345 T 1050 TUOptional Features Discount and premium entries using the discount key140 570 10 % 800 + P5 %575 + 100675 250 f+Applying manual conversion rate Applying preset conversion rateAuxiliary Payment Treatment Currency conversion Received-on Account and Paid-out Entries No sale exchangeAutomatic Sequencing Key a key Entries 12345 s 4800 rCorrection of the Last Entry direct void Correction600 328 Subtotal Void 1310 1755 +Procedure for programming Prior to ProgrammingBasic Function Programming Date and Time ProgrammingTax programming using a tax rate TimeTax Programming for Automatic Tax Calculation Function 1430 sSample tax table 12 sTax table applicable to the add-on tax Limitations to the entry of minimum breakpoints 100 @ 11 @111 Quantity for doughnut tax exempt for Canadian tax system Example 8%19 @ Modification of the left tax tableDepartment status Auxiliary Function ProgrammingDepartment Programming Preset unit price PLU Price Look-Up and Subdepartment Programming00011173 @ 1000Unit price and associated department assignment PLU/subdepartment selection10 P 25 % 6068 Miscellaneous Key ProgrammingRate for %, &and Amount for Percent rate limitation for %andFunction parameters for %, &and 200Function parameters for 00011006 @00 @ +/- sign018 @ Function parameters for C, cand Awhen using as CA keyEntry digit limit for r, Rand t Entering character codes with numeric keys on the keyboard Using character keys on the keyboardText Programming 231 Alphanumeric character code tableS1 P S2 PDepartment text PLU text item labelList of function texts 46 @ Card sClerk names Logo messagesDavid s Logo print format 6 typesForeign currency symbol Advanced ProgrammingRegister Number and Consecutive Number Programming Register numberSetting consecutive numbers S2 @Electronic Journal EJ Programming EJ memory typePGM mode operation records type Action when EJ memory area is fullFunction parameters for EJ S68 @ 00100002 sAS5 @ Various Function Selection ProgrammingFunction selection for miscellaneous keys 00000100 sAPrint format Receipt print formatFunction selection for tax Printing styleOther programming Tax calculation system GSTPower save mode Logo message print formatS10 @ 0060 sA S11 @RS-232C interface 30 @Language selection Training clerk specification for training modeThermal printer density Auto key programming Automatic sequencing key Reading Stored ProgramsKey sequence for reading stored program Auto 2 p100 +Sample printouts Programming reportTraining Mode 1000Programming report Printer density programming report Auto key programming reportReading X and Resetting Z of Sales Totals Summary of Reading X and Resetting Z ReportsDaily Sales Totals Full sales report Sample reportClerk reports PLU sales reportHourly report Periodic Consolidation Full sales reportSample EJ report Printing journal data on the way of a transactionSample print 250 Incorrect receipt Cancellation receiptOverride Entries Case of Printer Error Operator MaintenanceCase of Power Failure Paper specification How to set the paper roll How to cut the paper endReplacing the Batteries Replacing the Paper RollRemoving the paper roll When the take-up spool is not usedWhen the take-up spool is used Installing the paper roll Removing a Paper JamOpening the Drawer by Hand Cleaning the Print HeadRemoving the Drawer Before Calling for Service Error code tableSpecifications Indice Programacion DE LAS Funciones Basicas Para el inicio rápidoPartes Y SUS Funciones Selector de modo y llaves de modoVisualizadores Símbolos del estado de la máquinaPara Empezar Registro Basico DE Ventas Ejemplo de registro básico de ventasEjemplo de operación de teclas ImpresiónRegistros de sección Aviso de errorRegistros de artículos Registros de un solo artículo Registros repetidos Registros de multiplicaciónRegistros de precios divididos Registros de PLU/subsecciones~ s 950 a c Caracteristicas Opcionales 800 50 t a675 *-A ~ m10 % a800 +7 P5 %A Correccion Hora Programacion DE LASProgramación de la fecha y de la hora Fecha Tabla de impuestos de muestra Tabla de impuestos aplicable al impuesto añadidoS9 @2 @4 @12 sA Programació n de secciones Estado de secció nPrimer nú mero 1 ó Segundo nú mero 1 a Elemento Selecció n RegistroAsignación de precios unitarios y de secciones asociadas Precio unitario preajustadoProgramación de PLU codificación de precios y subsección Selección de PLU/subsección Programación de teclas misceláneas Tasa para %, & yImporte para Límite de tasa porcentual para % yParámetros de función para %, &y Parámetros de función paraLímite de dígitos de entrada parar, Ry t Elemento Selección RegistroProgramación de texto Empleo de las teclas de caracteres del teclado1Elemento Selección Registro Impresión de pie del reciboS1 P!FRUTA sA Texto de secciónTexto de PLU etiqueta de artículo Texto de funció n Lista de textos de funciónSímbolo de divisas Nombres de dependienteMensajes de membrete Programacion Avanzada Programación 1 de selección de diversas funciones Impresión temporal de EJ durante la transacciónTipo de registros de operación en el modo PGM Acción cuando el área de memoria de EJ está llenaSelecció n de funció n para teclas miscelá neas Formato de impresió nFormato de impresió n de recibos Có digo de tarea Elemento Selecció n RegistroCódigo de tarea Elemento Selección Registro Selección de función para impuestosOtras programaciones Impresión comprimida Sistema de cálculo de impuestosFormato de impresión del mensaje del membrete Interfaz RS-232CProgramación de la tecla Auto Tecla de secuencia automática Densidad de impresora térmicaSelección del idioma Modo DE Instruccion Lectura X Y Reposicion Z DE LOS Totales DE VentasLectura de programas almacenados Resumen de informes de lectura X y reposición ZLectura Y Reposicion DE Informes EJ Registros DE Anulacion En caso de corte de la alimentació nReemplazo de las pilas En el caso de error de impresoraPrecauciones al manejar la impresora Reemplazo del rollo de papel Extracción del rollo de papelInstalación del rollo de papel Cuando emplee el carrete de tomaExtracción del papel atascado Limpieza del cabezal de impresiónPrecaución Que sea duro porque podría estropear el cabezalAbertura manual del cajón Antes de solicitar el servicio de un técnicoTabla de códigos de error