2-4 Connecting the Compressed Air Supply
Before connecting the compressed air supply, check the following:
Check compressed air piping for correct installation and assembly.
Check the fittings, length and quality of the hose connections for agreement with requirements.
Check all compressed air lines for leakages.
Supply clean, dry
The air should be free of oil and water.
1.Find the compressed air hose, which has been supplied.
2.Connect it to the venturi and control assembly.
3.Firmly press the
4.Connect the control assembly to the compressed air supply.
5.Set the pressure on the pressure reducer at
Note: Unit requires 25 SCFM at 80 psig if continuously run. Typical air consumption is
WARNING! Make sure that the PLANT supply air lines are large enough to provide required air flow and line pressure. Failure to provide adequate air flow and line pressure will result in conveying performance issues.