Sterling SVL-D, SVL-A, SVL-B, SVL-C installation instructions Explanations and Information

Page 7

DANGER! DANGER indicates an imminently hazardous situation that, if not avoided, will result in death or serious injury.

WARNING!

WARNING indicates a potentially hazardous situation or practice

 

that, if not avoided, could result in death or serious injury.

Caution!

CAUTION indicates a potentially hazardous situation or practice

 

that, if not avoided, may result in minor or moderate injury or in

 

property damage.

1-2 Explanations and Information

Various terms and designations are used frequently in these operating instructions to ensure clarity. Therefore, please note that the terms used in the text are defined as follows:

Equipment

Equipment can mean an individual unit, a machine, or an installation.

Operating Personnel

Operating personnel are individuals who are responsible for operating the equipment. All personnel engaged in the use of the machine should become familiar with its operation as described in the manual. Each individual must take responsibility for understanding and following all safety rules. Operating personnel should be at least 16 years old.

Operator

The operator of the equipment (production manager, foreman, etc.) is the person responsible for all production sequences. The operator instructs the operating personnel on what should be done.

Operating Instructions

The plant operating instructions describe the interaction of the equipment, production sequences or methods. The plant operating instructions must be compiled by the operator of the equipment.

Equipment Foreman

When several operating personnel work on one machine, the equipment foreman arranges the order. The equipment foreman must be appointed by the operator.

Trained Personnel

Trained personnel are persons who, due to their training, are authorized to perform the required work.

SVL-A, SVL-B, SVL-C, & SVL-D Self-Contained Material Loaders - Venturi Style 7 of 49

Image 7
Contents SVL-A, SVL-B, SVL-C, & SVL-D Operation and Installation InstructionsPage Unpacking and Inspection Shipping Information Table of Contents Technical Data How to Use This Manual Safety InstructionsExplanations and Information How to Use This Manual For Your SafetyMaintenance Responsibility Unit SafetyGeneral Information InstallationOror Not to scale Installing the Material ReceiverPage SF-1 Feeder To Digital Dosing FeederAssembly Installing the Control AssemblyShop Air 10 Venturi Assembly Connecting the Compressed Air SupplyPerformance Connecting Material LinesTo Install the Ratio Option SVL-C Two inlet InstallationElectrical Connection Operational Summary Functional DescriptionMethod of Functioning Venturi AssemblyControl and Regulator Unit Control AssemblyAdjusting Compressed Air Flow SetupPreparations Setting the Mixing Ratio of the Components SVL-C Units Operation Basic Setting of the Filling Level in the Conveyor HopperMounting Electrical ConnectionProgramming Empty adjustmentLocking Full adjustmentUnlocking Error messagesSet-up / Operation Maintenance Intervals MaintenanceDaily Weekly Every 3 months Pertaining to the use of compressed air Cleaning the Conveying FilterSVL-A Cleaning the Compressed Air FilterDisassembly Adjusting the Level ProbeRemedy See Test Steps Below TroubleshootingPage Technical Data SVL-A Dimension SheetSVL-B SVL-C SVL-D Spare Parts Lists SVL-B SVL-C Control Assembly Wand Assembly 10 Take-Off Wand Assembly Quick Start Guide -SVL Self Contained Material Loader Parts Department Technical Assistance