2-2 Installing the Material Receiver
The self contained material loader can be installed directly on the processing machine.
Make sure that all connections are tight so that the conveying performance is not impaired. The material receiver is equipped with a mounting flange.
Depending on the position, drill the holes for fastening the conveyor hopper to the processing machine. One of 2 standard bolt patters may be used, sight glass or bin mounted.(as shown in fig. 2.4)
Mount the material receiver on the processing machine.
Install the vinyl flexible hose on the material receiver inlet and on the venturi assemblies using the hose clamps that are supplied.
Make sure all equipment is properly grounded to minimize static and risk of shock.
Note: The hopper should not touch any other component.
Figure 2.4
(not to scale)
Sight Glass Mounting Flange | Bin Mount Mounting Flange |