Sterling SVL-B, SVL-A, SVL-C, SVL-D installation instructions Connecting Material Lines, Performance

Page 17

2-5 Connecting Material Lines

Typical SVL Loader installations use flex hose to connect the loader to the venturi.

Caution!

The material hose should be as straight as possible. Avoid

 

loops and S-curves in flexible hose. This can hurt conveying

 

performance.

1.Attach flex hose over the inlet stub of the loader. Secure the hose with the provided hose clamp. The hose should fit over the inlet stub at least 1 inch. Position the hose clamp at least ¼ inch from the end of the inlet.

2.Connect the flex hose to the venturi. From the loader to the venturi, attach the flex hose in the same manner as described above, being sure of proper orientation (note arrow on venturi). Reduce flex hose down to the shortest possible length to avoid wasting compressed air energy.

Caution!

Flex hose is typically considered a wear item, so it should be

 

routed or secured in such a way as to make replacement easy.

 

Flex hose should not be routed close to electrical wires,

 

especially control signal wires since static electricity, commonly

 

generated by conveyed material can be discharged to the wires,

 

fouling electrical operation. If static electricity needs to be

 

avoided, use grounded flex hose. (Part # - A0565934)

Note: When connecting a vertical feed tube or wand:(used for conveying out of open- top boxes) sufficient slack should be left to allow movement of the feed tube when the material supply gets low, but “valleys” or droops in the hose should be avoided.

When connecting a Grinder/Take-off:

(used for conveying from surge bins, silos or granulators) less slack will be needed, but flex hose is still suggested to allow the hose to be easily disconnected in the event of trouble. A hose clamp should be installed to prevent the hose from coming unconnected from the feed tube.

TIP: Rigid tubing like aluminum and stainless steel will last much longer and provide a straighter path for material flow, usually increasing the loader’s ability to convey material. When used, rigid tubing should be coupled tightly to prevent air leaks. It should be routed to minimize bends, and should be connected to the loader with flex hose to allow quick disconnection of the loader.

SVL-A, SVL-B, SVL-C, & SVL-D Self-Contained Material Loaders - Venturi Style 17 of 49

Page 16 Page 18
Image 17
Page 16 Page 18
Contents SVL-A, SVL-B, SVL-C, & SVL-D Operation and Installation InstructionsPage Unpacking and Inspection Shipping InformationTable of Contents Technical Data How to Use This Manual Safety InstructionsExplanations and Information How to Use This Manual For Your SafetyMaintenance Responsibility Unit SafetyGeneral Information InstallationOror Not to scale Installing the Material ReceiverPage SF-1 Feeder To Digital Dosing FeederShop Air Installing the Control AssemblyAssembly 10 Venturi Assembly Connecting the Compressed Air SupplyPerformance Connecting Material LinesTo Install the Ratio Option SVL-C Two inlet InstallationElectrical Connection Operational Summary Functional DescriptionMethod of Functioning Venturi AssemblyControl and Regulator Unit Control AssemblyPreparations SetupAdjusting Compressed Air Flow Setting the Mixing Ratio of the Components SVL-C Units Mounting Basic Setting of the Filling Level in the Conveyor HopperElectrical Connection OperationProgramming Empty adjustmentLocking Full adjustmentUnlocking Error messagesSet-up / Operation Daily Weekly Every 3 months MaintenanceMaintenance Intervals Pertaining to the use of compressed air Cleaning the Conveying FilterSVL-A Cleaning the Compressed Air FilterDisassembly Adjusting the Level ProbeRemedy See Test Steps Below TroubleshootingPage Technical Data SVL-A Dimension SheetSVL-B SVL-C SVL-D Spare Parts Lists SVL-B SVL-C Control Assembly Wand Assembly 10 Take-Off Wand Assembly Quick Start Guide -SVL Self Contained Material Loader Parts Department Technical Assistance

SVL-D, SVL-C, SVL-B, SVL-A specifications

The Sterling SVL series, comprising models SVL-A, SVL-B, SVL-C, and SVL-D, represents a cutting-edge advancement in modern vehicle technology. Each model has been meticulously designed to cater to various consumer needs while maintaining high standards in performance, safety, and comfort.

The SVL-A model is renowned for its versatile urban efficiency. Engineered with a compact design, it excels in city driving, making it easy to navigate through tight spaces. The SVL-A features an eco-friendly hybrid powertrain, allowing for reduced emissions and improved fuel economy. Inside, it boasts an intuitive infotainment system, providing seamless connectivity with smartphones, and a suite of advanced safety features including lane departure warning and adaptive cruise control.

Transitioning to the SVL-B, this model emphasizes robustness and capability. Ideal for adventure enthusiasts, it includes an all-terrain drive mode that adapts to various surfaces, from rugged hills to muddy paths. The SVL-B is equipped with all-wheel drive and sturdier suspension systems, ensuring stability and control. Comfort is not compromised, as the interior is adorned with premium materials, and additional features such as heated seats and a panoramic sunroof enhance the driving experience.

The SVL-C steps into the luxury segment while maintaining practical elements. Designed for families, it offers generous interior space, three rows of seating, and advanced entertainment options for passengers. Safety is a top priority, with enhanced features like automated emergency braking and a comprehensive set of airbags. Its advanced climate control system ensures optimal comfort regardless of weather conditions.

Lastly, the SVL-D model epitomizes innovation with its fully electric powertrain. This environmentally conscious vehicle boasts impressive range and quick charging capabilities, appealing to those who prioritize sustainability. The SVL-D is packed with smart technologies including an advanced driver-assistance system that utilizes AI-based functions to enhance driving efficiency and safety. Additionally, an over-the-air update capability ensures that the vehicle can continuously improve after purchase.

Overall, Sterling's SVL series showcases a commitment to diversity in automotive engineering, offering something for every driver, from eco-conscious urbanites to adventurous families and tech-savvy individuals, all while prioritizing high performance and safety standards.
Top Page Image Contents