Sterling SVL-A, SVL-B, SVL-C, SVL-D installation instructions Unlocking, Error messages

Page 28

Unlocking

When the programming pushbutton is released the unit is unlocked and all programming functions are active again.

Error messages

If empty or full adjustment cannot be made, the red LED flashes quickly at about 8Hz after the adjustment attempt (adjustment error).

To delete this error message press the programming pushbutton once or power off and then power on again. The measured values successfully read so far remain unchanged.

Possible reasons for an error message:

•The signal difference between the empty and full state is too small (e.g. empty and full adjustment without sufficient change of the level).

•The signal change between the empty and full state is in the wrong order (e.g. empty adjustment in the full state and then full adjustment in the empty state).

•Empty adjustment outside the operating range (e.g. empty adjustment in case of direct contact with an electrically grounded medium, e.g. if the active zone is immersed in water).

Help: Avoid the above-mentioned errors and repeat the adjustment for error correction.

Further faults:

•Electronic fault or sensing zone of the unit damaged

•Internal fault (can only be deleted by power off and then power on again, hardware reset).

SVL-A, SVL-B, SVL-C, & SVL-D Self-Contained Material Loaders - Venturi Style 28 of 49

Page 27 Page 29
Image 28
Page 27 Page 29
Contents Operation and Installation Instructions SVL-A, SVL-B, SVL-C, & SVL-DPage Shipping Information Unpacking and InspectionTable of Contents Technical Data Safety Instructions How to Use This ManualExplanations and Information For Your Safety How to Use This ManualUnit Safety Maintenance ResponsibilityInstallation General InformationOror Installing the Material Receiver Not to scalePage To Digital Dosing Feeder SF-1 FeederAssembly Installing the Control AssemblyShop Air Connecting the Compressed Air Supply 10 Venturi AssemblyConnecting Material Lines PerformanceSVL-C Two inlet Installation To Install the Ratio OptionElectrical Connection Functional Description Operational SummaryVenturi Assembly Method of FunctioningControl Assembly Control and Regulator UnitAdjusting Compressed Air Flow SetupPreparations Setting the Mixing Ratio of the Components SVL-C Units Basic Setting of the Filling Level in the Conveyor Hopper MountingElectrical Connection OperationEmpty adjustment ProgrammingFull adjustment LockingError messages UnlockingSet-up / Operation Maintenance Intervals MaintenanceDaily Weekly Every 3 months Cleaning the Conveying Filter Pertaining to the use of compressed airCleaning the Compressed Air Filter SVL-AAdjusting the Level Probe DisassemblyTroubleshooting Remedy See Test Steps BelowPage Technical Data Dimension Sheet SVL-ASVL-B SVL-C SVL-D Spare Parts Lists SVL-B SVL-C Control Assembly Wand Assembly 10 Take-Off Wand Assembly Quick Start Guide -SVL Self Contained Material Loader Technical Assistance Parts Department

SVL-D, SVL-C, SVL-B, SVL-A specifications

The Sterling SVL series, comprising models SVL-A, SVL-B, SVL-C, and SVL-D, represents a cutting-edge advancement in modern vehicle technology. Each model has been meticulously designed to cater to various consumer needs while maintaining high standards in performance, safety, and comfort.

The SVL-A model is renowned for its versatile urban efficiency. Engineered with a compact design, it excels in city driving, making it easy to navigate through tight spaces. The SVL-A features an eco-friendly hybrid powertrain, allowing for reduced emissions and improved fuel economy. Inside, it boasts an intuitive infotainment system, providing seamless connectivity with smartphones, and a suite of advanced safety features including lane departure warning and adaptive cruise control.

Transitioning to the SVL-B, this model emphasizes robustness and capability. Ideal for adventure enthusiasts, it includes an all-terrain drive mode that adapts to various surfaces, from rugged hills to muddy paths. The SVL-B is equipped with all-wheel drive and sturdier suspension systems, ensuring stability and control. Comfort is not compromised, as the interior is adorned with premium materials, and additional features such as heated seats and a panoramic sunroof enhance the driving experience.

The SVL-C steps into the luxury segment while maintaining practical elements. Designed for families, it offers generous interior space, three rows of seating, and advanced entertainment options for passengers. Safety is a top priority, with enhanced features like automated emergency braking and a comprehensive set of airbags. Its advanced climate control system ensures optimal comfort regardless of weather conditions.

Lastly, the SVL-D model epitomizes innovation with its fully electric powertrain. This environmentally conscious vehicle boasts impressive range and quick charging capabilities, appealing to those who prioritize sustainability. The SVL-D is packed with smart technologies including an advanced driver-assistance system that utilizes AI-based functions to enhance driving efficiency and safety. Additionally, an over-the-air update capability ensures that the vehicle can continuously improve after purchase.

Overall, Sterling's SVL series showcases a commitment to diversity in automotive engineering, offering something for every driver, from eco-conscious urbanites to adventurous families and tech-savvy individuals, all while prioritizing high performance and safety standards.
Top Page Image Contents