Sterling SVL-B, SVL-A, SVL-C, SVL-D installation instructions Set-up / Operation

Page 29

Set-up / Operation:

Check the safe functioning of the unit. To do so, bring about a sensor response by taking suitable measures.

Display by LEDs:

LED green

LED yellow

LED red

Flashes slowly (1Hz): adjustment mode empty adjustment

OFF: switching output disabled

ON: switching output enabled

Flashes quickly (8Hz): adjustment error, internal fault

Flashes slowly (1Hz): close to reaching the switching

The red LED becomes active for a short time during the change between "medium not present" and "medium present" (flashes at 1Hz) if the medium is close to reaching the switching threshold. This can occur in particular if the level changes very slowly and is no error message meaning a fault in the unit.

The operation of the level switch is maintenance-free. For a correct function ensure the sensing face and the open space should be kept free of deposits and foreign bodies, particularly for mounting with the sensing face showing upwards.

SVL-A, SVL-B, SVL-C, & SVL-D Self-Contained Material Loaders - Venturi Style 29 of 49

Image 29

Contents SVL-A, SVL-B, SVL-C, & SVL-D Operation and Installation InstructionsPage Unpacking and Inspection Shipping InformationTable of Contents Technical Data How to Use This Manual Safety InstructionsExplanations and Information How to Use This Manual For Your SafetyMaintenance Responsibility Unit SafetyGeneral Information InstallationOror Not to scale Installing the Material ReceiverPage SF-1 Feeder To Digital Dosing FeederShop Air Installing the Control AssemblyAssembly 10 Venturi Assembly Connecting the Compressed Air SupplyPerformance Connecting Material LinesTo Install the Ratio Option SVL-C Two inlet InstallationElectrical Connection Operational Summary Functional DescriptionMethod of Functioning Venturi AssemblyControl and Regulator Unit Control AssemblyPreparations SetupAdjusting Compressed Air Flow Setting the Mixing Ratio of the Components SVL-C Units Mounting Basic Setting of the Filling Level in the Conveyor HopperElectrical Connection Operation Programming Empty adjustmentLocking Full adjustmentUnlocking Error messagesSet-up / Operation Daily Weekly Every 3 months MaintenanceMaintenance Intervals Pertaining to the use of compressed air Cleaning the Conveying FilterSVL-A Cleaning the Compressed Air FilterDisassembly Adjusting the Level ProbeRemedy See Test Steps Below TroubleshootingPage Technical Data SVL-A Dimension SheetSVL-B SVL-C SVL-D Spare Parts Lists SVL-B SVL-C Control Assembly Wand Assembly 10 Take-Off Wand Assembly Quick Start Guide -SVL Self Contained Material Loader Parts Department Technical Assistance