|    |    |    | Line Out  | 
   |    |    |    |    | 
   |    | Speaker  |    |    | 
   |    |    |    | Line In  | 
CVBS S-Video  |    |    | 
YPbPr Output  |    | Video In  | 
   |    |    |    | 
   |    |    |    | Audio Output  | 
DVD Player
VGA(LCD/CRT)Monitor
VGA Out
ITU-R 656
YUV 4:2:2 
 DE-interlace
Decoder
Figure 6.2. The setup for the TV box demonstration.
6.3 TV Box Picture in Picture (PIP) Demonstration
The DE2-70 board has two TV decoders and RCA jacks that allow users to process two video sources simultaneously using the 2C70 FPGA. This demonstration will multiplex two different video source signals from the TV decoders and display both video signals on the LCD/CRT monitor using picture in picture mode (PIP mode : One picture is displayed on the full screen and the other picture is displayed in a small sub window). Also, users can select which video is displayed in main/sub window via a toggle switch.
Figure 6.3 shows the basic block diagram of this demonstration. There are three major blocks in the circuit, called Composite_to_VGA, PIP_Position_Controller, and VGA_Multiplexer. The Composite_to_VGA block consists all of the function blocks in the TV box demonstration project
69