On-Q/Legrand 364732-01 Device Information Adapter Address, Address. To modify the address

Page 10

1.CATV dynamic Mode (Cable Modem)

Selecting this mode (see Figure 7) enables you to obtain dynamic IP address from your ISP via DHCP support. Once the IP address is obtained, you can access the Internet.

For most cases, this page needs no input. However, some ISPs may require some information for identification purpose. For example: Device/Computer name and Domain Name; please enter the information required to complete the settings.

Check to modify the MAC address when necessary.

 

 

 

Figure 7

 

 

 

 

Device Information

 

 

Adapter Address

This field is grayed out, because the Adapter Address is not

 

 

 

supposed to be entered randomly. Do Not alter the contents

 

 

 

unless you are sure it is necessary to modify your MAC

 

 

 

address. To modify the address;

 

 

 

check Modify and enter the desired MAC address.

 

Device/Computer Name

Enter a descriptive name for identification purpose. Some

 

 

 

Internet Service Providers (ISP) requires this information,

 

 

 

and if that is the case, they will provide you with the name.

 

Domain Name

For example: yourcompany.com. The maximum input for

 

 

 

this field is 32 alphanumeric characters and it is case

 

 

 

insensitive. Note: 1. Your ISP may ask you to input a

 

 

 

certain domain name. 2. Domain name is also required for

 

 

 

internal network’s email and news functions.

 

IP Config

This field is grayed out for the IP address is obtained

 

 

 

dynamically

 

DNS Configuration

 

 

DNS Server

Select Dynamic or Static. Enter the information of Primary

 

 

 

and Secondary DNS Server provided by your ISP when

 

 

 

Static configuration is selected.

 

 

 

 

 

 

 

 

Innovations in Home Living.

301 Fulling Mill Road, Suite G ©Copyright 2004 by OnQ Technologies, Inc All Rights Reserved.

Middletown, PA 17057

www.onqhome.com

(800)-321-2343

7

Page 9 Page 11
Image 10
Page 9 Page 11
Contents
Port ROUTER/SWITCH P/N FCC Certifications CE Mark WarningTable of Contents Small Office/ Home Office Setup IntroductionRouter/Switch 9VDC Power Supply P/N II. Product Overview Switch Port LEDs WAN LED Status LED Router/Switch Module Connection Area VDC Input Network Port Local Switch Ports III. Installation Innovations in Home Living Obtain configuration automatically Not run PPPoE software on your computersUnless you are sure it is necessary to modify your MAC Static configuration is selectedDevice Information Adapter Address Address. To modify the addressCheck Modify and enter the desired MAC PPPoE DSL dynamic ModeAddress Input for this field is 32 alphanumeric charactersDevice will save Help connecting to certain web sites or speedingClick on Information, restart and return to the previousNecessary to modify your MAC address. To modify Static ModeNot alter the content unless you are sure it is You with the nameSave Undo Check this radio button to enable this device to Following field for you to enter the starting IPTo continue Addresses. Click Back to return to the Local PortWins server Modify the Configuration Port Advanced SetupChange Administrator’s password Block Internet EnableAddress with all F’s ResultVirtual Server Undo ADD IP addresses to filter/forward IP addressesIP Range Direction ~From Local IP ~To Remote IPClick to delete all the filters on the list Added filter will appear on the Filter ListFilter List Displays all the Packet Filters Click on the Index drop-down menu to selectStatic Route To clear all the settings on this After completing the settings on this page, clickTo save the settings SaveUndo Save Information on the Internet Port Network Status Connection StatusRELEASE/DISCONNECT RENEW/CONNECTRefresh Click this button to refresh the list Others Factory Reset see Figure To reset to factory default settings, click the GO buttonSettings Save ConfigurationTo save the current configuration to file Load Configuration From File File Path/NameFirmware Upgrade see Figure Upgrade NOWVI. Troubleshooting What is a DMZ?What does the message IP address conflict mean? What is PPPoE PPP over Ethernet ?How can I know if I am using PPPoE? Check the status of this productIP Configuration Type ping 168.95.192.1 and click OK Reply from 192.168.0.1 bytes=32 time=3ms TTL=100AOE NTP, HTTP, TftpWAN 2300-2400tcp 2300-2400udp 47624tcp VDO Live NonePassword AuthenticationCHAP failure Is now available Connecting to serverAuthentication Chap Xxx Minutes Connection establish timeout
Top Page Image Contents