On-Q/Legrand 364732-01 owner manual Static Mode, Not alter the content unless you are sure it is

Page 13

3.Static Mode

For leased line users, information provided by their ISP has to be filled in the below respective fields when this mode is selected (see Figure 9). Information from your ISP includes: IP address, Subnet Mask, Gateway, primary DNS and secondary DNS.

NOTE: There may be more than one IP address assigned by your ISP, select one address and enter its associated information in the corresponding fields.

 

 

 

Figure 9

 

 

 

 

Device Information

 

 

Adapter Address

This field is grayed out, because the Adapter

 

 

 

Address is not supposed to be entered randomly. Do

 

 

 

Not alter the content unless you are sure it is

 

 

 

necessary to modify your MAC address. To modify

 

 

 

the address,

 

 

 

check Modify and enter the desired MAC

 

 

 

address.

 

Device/Computer Name

Enter a descriptive name for identification purpose.

 

 

 

Some Internet Service Providers (ISP) requires this

 

 

 

information and if that is the case, they will provide

 

 

 

you with the name

 

Domain Name

For example: yourcompany.com. The maximum

 

 

 

input for this field is 32 alphanumeric characters

 

 

 

and it is case insensitive

 

 

 

 

 

 

 

 

Innovations in Home Living.

301 Fulling Mill Road, Suite G ©Copyright 2004 by OnQ Technologies, Inc All Rights Reserved.

Middletown, PA 17057

www.onqhome.com

(800)-321-2343

10

Image 13 Contents
Port ROUTER/SWITCH P/N CE Mark Warning FCC CertificationsTable of Contents Introduction Small Office/ Home Office SetupII. Product Overview Router/Switch 9VDC Power Supply P/NSwitch Port LEDs WAN LED Status LED Router/Switch Module Connection AreaVDC Input Network Port Local Switch Ports III. Installation Innovations in Home Living Not run PPPoE software on your computers Obtain configuration automaticallyDevice Information Adapter Address Static configuration is selectedUnless you are sure it is necessary to modify your MAC Address. To modify the addressAddress PPPoE DSL dynamic ModeCheck Modify and enter the desired MAC Input for this field is 32 alphanumeric charactersClick on Help connecting to certain web sites or speedingDevice will save Information, restart and return to the previousNot alter the content unless you are sure it is Static ModeNecessary to modify your MAC address. To modify You with the nameSave Undo Following field for you to enter the starting IP Check this radio button to enable this device toTo continue Addresses. Click Back to return to the Local PortWins server Modify the Configuration Port Advanced SetupChange Administrator’s password Address with all F’s EnableBlock Internet ResultVirtual Server Undo ADD IP Range IP addressesIP addresses to filter/forward Direction ~From Local IP ~To Remote IPFilter List Displays all the Packet Filters Added filter will appear on the Filter ListClick to delete all the filters on the list Click on the Index drop-down menu to selectStatic Route To save the settings After completing the settings on this page, clickTo clear all the settings on this SaveUndo Save RELEASE/DISCONNECT Network Status Connection StatusInformation on the Internet Port RENEW/CONNECTRefresh Click this button to refresh the list To reset to factory default settings, click the GO button Others Factory Reset see FigureTo save the current configuration to file Save ConfigurationSettings Load Configuration From File File Path/NameUpgrade NOW Firmware Upgrade see FigureWhat is a DMZ? VI. TroubleshootingHow can I know if I am using PPPoE? What is PPPoE PPP over Ethernet ?What does the message IP address conflict mean? Check the status of this productIP Configuration Reply from 192.168.0.1 bytes=32 time=3ms TTL=100 Type ping 168.95.192.1 and click OKWAN NTP, HTTP, TftpAOE 2300-2400tcp 2300-2400udp 47624tcp VDO Live NoneAuthentication Chap Is now available Connecting to serverPassword AuthenticationCHAP failure Xxx Minutes Connection establish timeout