Table of Contents

On-Q/Legrand 364732-01 owner manual Table of Contents

Page 3

			TABLE OF CONTENTS
I.	Introduction			1
II.	Product Overview			2
	A.	Features		2
	B.	Components Included		2
	C.	Replacement Parts		2
	D.	Detailed Physical Description		3
III. Installation				4
	A.	“Rough-In” Steps		4
	B.	“Trim-Out” Steps		4
IV. Initial Configuration				5
	A.	Configuring a Network Interface Card to talk to the Router/Switch		5
	B.	Logging on to the Router/Switch		5
	C.	Internet Port Setup		6
		1.	Cable Modem Setup	7
		2.	DSL Setup	8
		3.	Static Route Setup	10
	D.	Local Port Setup		12
V.	Advanced Setup			14
	A.	Management		14
	B.	Virtual Server		16
	C.	Packet Filter		18
	D.	Static Route		20
	E.	Dynamic DNS		22
	F.	Network Status		23
		1.	Connection Status	23
		2.	Sessions List	24
		3.	Users List	25
	G.	Others		26
		1.	Factory Reset	26
		2.	Saving Configuration	27
		3.	Firmware Upgrade	28
VI. Troubleshooting				29
	A.	Contact Information		29
	B.	FAQs		29
Appendices
	A.	Specifications		33
	B.	Supported Internet Applications		33
	C.	Internet Port Link Status		34

Innovations in Home Living.

Middletown, PA 17057

www.onqhome.com

(800)-321-2343

iii

Image 3

Contents

Port ROUTER/SWITCH P/N CE Mark Warning FCC CertificationsTable of Contents Introduction Small Office/ Home Office SetupII. Product Overview Router/Switch 9VDC Power Supply P/NRouter/Switch Module Connection Area Switch Port LEDs WAN LED Status LEDVDC Input Network Port Local Switch Ports III. Installation Innovations in Home Living Not run PPPoE software on your computers Obtain configuration automaticallyAddress. To modify the address Static configuration is selectedDevice Information Adapter Address Unless you are sure it is necessary to modify your MACInput for this field is 32 alphanumeric characters PPPoE DSL dynamic ModeAddress Check Modify and enter the desired MACInformation, restart and return to the previous Help connecting to certain web sites or speedingClick on Device will saveYou with the name Static ModeNot alter the content unless you are sure it is Necessary to modify your MAC address. To modifySave Undo Following field for you to enter the starting IP Check this radio button to enable this device toAddresses. Click Back to return to the Local Port To continueWins server Advanced Setup Modify the Configuration PortChange Administrator’s password Result EnableAddress with all F’s Block InternetVirtual Server Undo ADD Direction ~From Local IP ~To Remote IP IP addressesIP Range IP addresses to filter/forwardClick on the Index drop-down menu to select Added filter will appear on the Filter ListFilter List Displays all the Packet Filters Click to delete all the filters on the listStatic Route Save After completing the settings on this page, clickTo save the settings To clear all the settings on thisUndo Save RENEW/CONNECT Network Status Connection StatusRELEASE/DISCONNECT Information on the Internet PortRefresh Click this button to refresh the list To reset to factory default settings, click the GO button Others Factory Reset see FigureLoad Configuration From File File Path/Name Save ConfigurationTo save the current configuration to file SettingsUpgrade NOW Firmware Upgrade see FigureWhat is a DMZ? VI. TroubleshootingCheck the status of this product What is PPPoE PPP over Ethernet ?How can I know if I am using PPPoE? What does the message IP address conflict mean?IP Configuration Reply from 192.168.0.1 bytes=32 time=3ms TTL=100 Type ping 168.95.192.1 and click OK2300-2400tcp 2300-2400udp 47624tcp VDO Live None NTP, HTTP, TftpWAN AOEXxx Minutes Connection establish timeout Is now available Connecting to serverAuthentication Chap Password AuthenticationCHAP failure

On-Q/Legrand 364732-01 owner manual Table of Contents

Innovations in Home Living.