On-Q/Legrand 364732-01 Router/Switch Module Connection Area, Switch Port LEDs WAN LED Status LED

Page 6

D.On-Q Home 4 Port Router/Switch Detailed Physical Description

The following information describes the physical characteristics of the On-Q Home Router/Switch:

1.Router/Switch Module Connection Area

Figure 2 shows the Router/Switch connection area including:

9 VDC Power Receptacle – connection from power supply

WAN (Network) Port – 8 position RJ-45 jack (connects to Cable or DSL modem) Local Switch Ports – 8 position RJ-45 jacks (connection from outlets in rooms)

Reset Button - A dual-function button. A brief button press (with a pencil, pen, or other pointed object) resets the Router/Switch unit, while a longer button press (over 5 seconds) resets the Router/Switch unit to the factory default settings. If the Router/Switch is experiencing trouble connecting to the Internet, briefly press and release the Reset button to reset the unit. The Router/Switch will retain its configuration information during this reset operation. To reset the unit to the factory defaults, while the unit is powered, press and hold the Reset button for more than 5 seconds. This clears the user settings, including User ID, Password, IP Address, and Subnet Mask.

NOTE: Refer to Section IV Configuration for instructions on re-configuring the Router/Switch.

Switch Port LEDs

WAN LED Status LED

Power LED

STATUS

9 VDC Input Network Port

Local Switch Ports

Reset Button

Figure 2

2.Router/Switch Status LEDs (see Figure 2) Power – On solid green when power is supplied.

Status LED – On solid red indicates device is not working properly. Blinks red during power-up.

WAN (Network) LED – On solid green to indicate connected and linked to a Cable or DSL Modem. Blinks green to indicate receiving or sending data over the network.

Local Switch Port LEDs– On solid green to indicate proper connection to a local device (PC Network Interface Card). Blink to indicate receiving or sending data.

Innovations in Home Living.

301 Fulling Mill Road, Suite G ©Copyright 2004 by OnQ Technologies, Inc All Rights Reserved.

Middletown, PA 17057

www.onqhome.com

(800)-321-2343

3

Image 6
Contents Port ROUTER/SWITCH P/N FCC Certifications CE Mark WarningTable of Contents Small Office/ Home Office Setup IntroductionRouter/Switch 9VDC Power Supply P/N II. Product OverviewRouter/Switch Module Connection Area Switch Port LEDs WAN LED Status LEDVDC Input Network Port Local Switch Ports III. Installation Innovations in Home Living Obtain configuration automatically Not run PPPoE software on your computersUnless you are sure it is necessary to modify your MAC Static configuration is selectedDevice Information Adapter Address Address. To modify the addressCheck Modify and enter the desired MAC PPPoE DSL dynamic ModeAddress Input for this field is 32 alphanumeric charactersDevice will save Help connecting to certain web sites or speedingClick on Information, restart and return to the previousNecessary to modify your MAC address. To modify Static ModeNot alter the content unless you are sure it is You with the nameSave Undo Check this radio button to enable this device to Following field for you to enter the starting IPAddresses. Click Back to return to the Local Port To continueWins server Advanced Setup Modify the Configuration PortChange Administrator’s password Block Internet EnableAddress with all F’s ResultVirtual Server Undo ADD IP addresses to filter/forward IP addressesIP Range Direction ~From Local IP ~To Remote IPClick to delete all the filters on the list Added filter will appear on the Filter ListFilter List Displays all the Packet Filters Click on the Index drop-down menu to selectStatic Route To clear all the settings on this After completing the settings on this page, clickTo save the settings SaveUndo Save Information on the Internet Port Network Status Connection StatusRELEASE/DISCONNECT RENEW/CONNECTRefresh Click this button to refresh the list Others Factory Reset see Figure To reset to factory default settings, click the GO buttonSettings Save ConfigurationTo save the current configuration to file Load Configuration From File File Path/NameFirmware Upgrade see Figure Upgrade NOWVI. Troubleshooting What is a DMZ?What does the message IP address conflict mean? What is PPPoE PPP over Ethernet ?How can I know if I am using PPPoE? Check the status of this productIP Configuration Type ping 168.95.192.1 and click OK Reply from 192.168.0.1 bytes=32 time=3ms TTL=100AOE NTP, HTTP, TftpWAN 2300-2400tcp 2300-2400udp 47624tcp VDO Live NonePassword AuthenticationCHAP failure Is now available Connecting to serverAuthentication Chap Xxx Minutes Connection establish timeout

364732-01 specifications

The On-Q/Legrand 364732-01 is a versatile electrical product designed for modern homes and commercial spaces that require sophisticated connectivity solutions. This product exemplifies the convergence of functionality and design, catering to the increasing demand for efficient and aesthetically pleasing electrical and data systems.

One of the main features of the On-Q/Legrand 364732-01 is its integrated multimedia hub, which allows users to manage multiple forms of communication and entertainment from a single location. This capability is essential in today's homes where there is a need to accommodate various devices such as televisions, computers, and smart home technology. The hub supports a wide range of connectivity options, ensuring users can interface with everything from cable and satellite TV to streaming services.

The 364732-01 is also equipped with advanced technologies that promote enhanced performance. Its design includes support for both structured cabling and wireless networks, allowing for a seamless blend of wired and wireless connectivity. This dual capability ensures that users experience stable connections regardless of the device or medium in use.

An important characteristic of the On-Q/Legrand 364732-01 is its user-friendly installation process. The product is designed for easy integration within existing systems and is compatible with a variety of mounting and wiring configurations. This flexibility makes it an ideal choice for both professional electricians and DIY enthusiasts looking to upgrade their home’s connectivity options.

Security features are also a priority with the 364732-01. The unit includes options for network security, which helps protect user data and privacy while using connected devices. This is particularly vital in a world increasingly reliant on internet connectivity for personal and professional use.

Another advantage of this product is its aesthetic appeal. The design is sleek and unobtrusive, making it suitable for various interiors. Users can enjoy the benefits of advanced technology without compromising on style.

In summary, the On-Q/Legrand 364732-01 is a cutting-edge solution for today's connectivity demands. With its multimedia hub capabilities, support for both wired and wireless technologies, user-friendly installation, robust security features, and stylish design, it represents an essential investment for anyone looking to optimize their electrical and data systems. This product meets the needs of modern living by ensuring efficient communication and entertainment access while maintaining a focus on design and usability.