On-Q/Legrand 364732-01 owner manual Virtual Server

Page 19

B.Virtual Server

On this Virtual Server screen (see Figure 13), you can set up a local server with specific port number that stands for the service (e.g. web(80), FTP(21), Telnet(23)). When this device receives an incoming access request for this specific port, it will be forwarded to the corresponding internal server. You can add virtual servers by either port numbers or by names. There are a maximum of 24 Server entries allowed and each port number can only be assigned to one IP address.

NOTE: Setting up a Virtual Server is like opening the firewall, which exposes your network to users on the Internet. Which means the Router’s NAT will no longer be able to provide protection from hackers.

Figure 13

Innovations in Home Living.

301 Fulling Mill Road, Suite G ©Copyright 2004 by OnQ Technologies, Inc All Rights Reserved.

Middletown, PA 17057

www.onqhome.com

(800)-321-2343

16

Page 18 Page 20
Image 19
Page 18 Page 20
Contents
Port ROUTER/SWITCH P/N CE Mark Warning FCC CertificationsTable of Contents Introduction Small Office/ Home Office SetupII. Product Overview Router/Switch 9VDC Power Supply P/NSwitch Port LEDs WAN LED Status LED Router/Switch Module Connection AreaVDC Input Network Port Local Switch Ports III. Installation Innovations in Home Living Not run PPPoE software on your computers Obtain configuration automaticallyAddress. To modify the address Static configuration is selectedDevice Information Adapter Address Unless you are sure it is necessary to modify your MACInput for this field is 32 alphanumeric characters PPPoE DSL dynamic ModeAddress Check Modify and enter the desired MACInformation, restart and return to the previous Help connecting to certain web sites or speedingClick on Device will saveYou with the name Static ModeNot alter the content unless you are sure it is Necessary to modify your MAC address. To modifySave Undo Following field for you to enter the starting IP Check this radio button to enable this device toTo continue Addresses. Click Back to return to the Local PortWins server Modify the Configuration Port Advanced SetupChange Administrator’s password Result EnableAddress with all F’s Block InternetVirtual Server Undo ADD Direction ~From Local IP ~To Remote IP IP addressesIP Range IP addresses to filter/forwardClick on the Index drop-down menu to select Added filter will appear on the Filter ListFilter List Displays all the Packet Filters Click to delete all the filters on the listStatic Route Save After completing the settings on this page, clickTo save the settings To clear all the settings on thisUndo Save RENEW/CONNECT Network Status Connection StatusRELEASE/DISCONNECT Information on the Internet PortRefresh Click this button to refresh the list To reset to factory default settings, click the GO button Others Factory Reset see FigureLoad Configuration From File File Path/Name Save ConfigurationTo save the current configuration to file SettingsUpgrade NOW Firmware Upgrade see FigureWhat is a DMZ? VI. TroubleshootingCheck the status of this product What is PPPoE PPP over Ethernet ?How can I know if I am using PPPoE? What does the message IP address conflict mean?IP Configuration Reply from 192.168.0.1 bytes=32 time=3ms TTL=100 Type ping 168.95.192.1 and click OK2300-2400tcp 2300-2400udp 47624tcp VDO Live None NTP, HTTP, TftpWAN AOEXxx Minutes Connection establish timeout Is now available Connecting to serverAuthentication Chap Password AuthenticationCHAP failure
Top Page Image Contents