On-Q/Legrand 364732-01 owner manual IP Configuration

Page 34

Figure 27 displays the adapter address and current TCP/IP address.

NOTE: At the “Ethernet Adapter Information”, select the correct Ethernet adapter that is installed in this computer.

Select the correct Ethernet adapter.

Figure 27: IP Configuration

Click the More Info button to get the following detailed configuration information.

Click here to reveal more.

Figure 28: IP Configuration

On the top (see Figure 28), the “Host Name” and “DNS server” are what the computer is called when it is looking for a named resource. The default gateway is the server through which the client connects to the Internet. The DHCP Server identifies the network server that assigns IP addresses to computers on the network.

Innovations in Home Living.

301 Fulling Mill Road, Suite G ©Copyright 2004 by OnQ Technologies, Inc All Rights Reserved.

Middletown, PA 17057

www.onqhome.com

(800)-321-2343

31

Page 33 Page 35
Image 34
Page 33 Page 35
Contents
Port ROUTER/SWITCH P/N FCC Certifications CE Mark WarningTable of Contents Small Office/ Home Office Setup IntroductionRouter/Switch 9VDC Power Supply P/N II. Product OverviewSwitch Port LEDs WAN LED Status LED Router/Switch Module Connection AreaVDC Input Network Port Local Switch Ports III. Installation Innovations in Home Living Obtain configuration automatically Not run PPPoE software on your computersUnless you are sure it is necessary to modify your MAC Static configuration is selectedDevice Information Adapter Address Address. To modify the addressCheck Modify and enter the desired MAC PPPoE DSL dynamic ModeAddress Input for this field is 32 alphanumeric charactersDevice will save Help connecting to certain web sites or speedingClick on Information, restart and return to the previousNecessary to modify your MAC address. To modify Static ModeNot alter the content unless you are sure it is You with the nameSave Undo Check this radio button to enable this device to Following field for you to enter the starting IPTo continue Addresses. Click Back to return to the Local PortWins server Modify the Configuration Port Advanced SetupChange Administrator’s password Block Internet EnableAddress with all F’s ResultVirtual Server Undo ADD IP addresses to filter/forward IP addressesIP Range Direction ~From Local IP ~To Remote IPClick to delete all the filters on the list Added filter will appear on the Filter ListFilter List Displays all the Packet Filters Click on the Index drop-down menu to selectStatic Route To clear all the settings on this After completing the settings on this page, clickTo save the settings SaveUndo Save Information on the Internet Port Network Status Connection StatusRELEASE/DISCONNECT RENEW/CONNECTRefresh Click this button to refresh the list Others Factory Reset see Figure To reset to factory default settings, click the GO button Settings Save Configuration To save the current configuration to file Load Configuration From File File Path/NameFirmware Upgrade see Figure Upgrade NOWVI. Troubleshooting What is a DMZ?What does the message IP address conflict mean? What is PPPoE PPP over Ethernet ?How can I know if I am using PPPoE? Check the status of this productIP Configuration Type ping 168.95.192.1 and click OK Reply from 192.168.0.1 bytes=32 time=3ms TTL=100AOE NTP, HTTP, TftpWAN 2300-2400tcp 2300-2400udp 47624tcp VDO Live NonePassword AuthenticationCHAP failure Is now available Connecting to serverAuthentication Chap Xxx Minutes Connection establish timeout
Top Page Image Contents