Multi-Tech Systems MT3334ZDXV owner manual ATDS=n

		3 - AT Commands, S-Registers and Result Codes
Command:	&Qn	Asynchronous Communications Mode
Values:	n = 0, 5, or 6
Defaults:	5
Description: &Q0		Asynchronous with data buffering. Same as \N0.
	&Q5	Error control with data buffering. Same as \N3.
	&Q6	Asynchronous with data buffering. Same as \N0.
Command:	&Sn	Data Set Ready (DSR) Control
Values:	n = 0 or 1
Default:	0
Description: &S0		Force DSR high (on).
	&S1	Let DSR follow CD.
Command:	&Tn	Test Commands
Values:	n = 0, 1, 3 or 6
Default:	None
Description: &T0		Abort. Stop any test in progress.
	&T1	Local analog loop test.
	&T3	Local digital loopback test.
	&T6	Remote digital loopback test.
Command:	&V	View Current Configuration
Values:	n/a
Description:		Displays the active modem settings.
Command:	&Wn	Store Current Configuration
Values:	n = 0
Default:	None
Description: &W0		Store active modem settings in NVRAM; load them
		at power-on or following the ATZ command instead
		of loading the factory defaults from ROM.
Command:	&Yn	Select Stored Configuration for Hard Reset
Values:	n = 0
Default:	0
Description: &Y0		Select stored configuration 0 on power-up. (For
		backward compatibility with some software.)
Command:	&Zn=x	Store Telephone Number
Values:	n = 0, 1, 2 or 3
	x = Dialing string
Default:	None
Description:		Stores telephone dial string x in memory location
		n. Dial the stored number using the command
		ATDS=n.

33