Multi-Tech Systems MT3334ZDXV K n Set Break Control, N n Error Correction Mode Selection

MT3334ZDX/V Owner's Manual

Command:	\Kn	Set Break Control
Values:	n = 5
Default:	5
Description: \K5		Modem sends break signal received from the DTE
		to the remote modem.

Command:	\Nn	Error Correction Mode Selection
Values:	n = 0–5
Default:	3
Description: \N0		Non-error correction mode with data buffering
		(same as &Q6).
	\N1	Direct mode.
	\N2	MNP reliable mode.
	\N3	V.42/MNP auto-reliable mode.
	\N4	V.42 reliable mode.
	\N5	V.42, MNP, or non-error correction (same as \N3).
Command:	\Vn	Protocol Result Code
Values:	n = 0 or 1
Default:	1
Description: \V0		Disable protocol Result Code appended to DCE
		speed.
	\V1	Enable protocol Result Code appended to DCE
		speed.
Command:	%Cn	Data Compression Control
Values:	n = 0 or 1
Default:	1
Description: %C0		Disable V.42bis/MNP 5 data compression.
	%C1	Enable V.42bis/MNP 5 data compression.
Command:	$D	DTR Dialing
Values:	n = 0 or 1
Default:	0
Description: $D0		Disables DTR Dialing.
	$D1	Enables DTR Dialing.

34