Multi-Tech Systems MT3334ZDXV owner manual Modem CE Mark EMC and Safety Compliance

MT3334ZDX/V Owner's Manual

Modem CE Mark EMC and Safety Compliance

The CE mark is affixed to the enclosed Multi-Tech product to confirm compliance with the following European Community Directives:

Council Directive 89/336/EEC of 3 May 1989 on the approximation of laws of Member States relating to electromagnetic compatibility;

and

Council Directive 73/23/EEC of 19 February 1973 on the harmonization of the laws of Member States relating to electrical equipment designed for use within certain voltage limits;

both amended by

Council Directive 93/68/EEC of 22 July 1993 on the harmonization of CE marking requirements.

Australian and New Zealand Modem Warning Notice

Australian Modem Warning Notice

Modems connected to the Australian telecommunications network must have a valid AUSTEL permit. This modem has been specifically configured to ensure compliance with AUSTEL Standards. The following commands can affect compliance and must not be set outside the acceptable range.

Modem Commands:

Command	Default	Permissible Range
A:	-	Do not use
ATB	B0	Do not change
AT&G	&G2	Do not change
AT&P	&P1	Do not change
ATSn	see table below

S-Register	Default	Permissible Range
S6	4	2 - 5

64