Multi-Tech Systems MT5600BA, MT5600BL What You Will Need, Safety Warnings, We supply, You supply

MultiModemII User Guide

Introduction

We know you are eager to get your MultiModemII up and running, so we’ll show you step-by-step how to set it up, check it out, and make your first calls.

What You Will Need

Before starting, please make sure you have everything you need:

We supply

An MT5600BA or MT5600 BL modem

A wall mount transformer

One (MT5600BA) or three (MT5600BL) modular telephone cables

Trio communications software

A Quick Start Guide

4This User Guide on disk An installation disk

You supply

A computer with an unused serial port

Ashielded RS-232 serial cable with a male DB-25 connector on one end and a connector to match your computer’s serial port on the other end

A nearby AC power outlet

4A nearby telephone line jack

A nearby leased line jack or terminals (optional)

Safety Warnings

•Use this product only with UL- and CUL-listed computers.

•To reduce the risk of fire, use only 26 AWG or larger telephone wiring.

•Never install telephone wiring during a lightning storm.

•Never install a telephone jack in a wet location unless the jack is specifically de- signed for wet locations.

•Never touch uninsulated telephone wires or terminals unless the telephone line has been disconnected at the network interface.

•Use caution when installing or modifying telephone lines.

•Avoid using a telephone (other than a cordless type) during an electrical storm; there is a risk of electrical shock from lightning.

•Do not use a telephone in the vicinity of a gas leak.

6