Lantronix 2100E Network Configuration, Network Mode Configuration, Web Manager Configuration

4: Web Manager Configuration

The main menu is on the left panel of the Web Manager window.

Network Configuration

Select Network from the main menu to display the unit's network values. The following sections describe the configurable network parameters.

Note: If the IP address is assigned via DHCP, its DHCP settings do not display.

Figure 4-2. Network Settings

Network Mode Configuration

To determine the unit’s network mode:

1.Click Network from the main menu.

2.Modify the following:

Network Mode

Select Wireless Only to enable only the wireless network connectivity for the WiBox 2100E. Select Wired Only to enable only the Ethernet network connectivity. Select Bridging (Single Host) to enable bridging on the WiBox 2100E (for more information on bridging, see 11: Wireless Bridging).

WiBox® 2100E Device Server User Guide 27