Lantronix 2100E Connection Settings TCP, Flush Output Buffer Network to Serial, Connect Protocol

4: Web Manager Configuration

At Time of Disconnect

Select Yes to clear the input buffer when the network connection to or from the device is disconnected. The default setting is No.

Flush Output Buffer (Network to Serial)

With Active Connect	Select Yes to clear the output buffer with a connection that is initiated
	from the device to the network. The default setting is No.
With Passive Connect	Select Yes to clear the output buffer with a connection initiated from the
	network to the device. The default setting is No.
At Time of Disconnect	Select Yes to clear the output buffer when the network connection to or
	from the device is disconnected. The default setting is No.

3.When you are finished, click the OK button.

4.On the main menu, click Apply Settings.

Connection Settings - TCP

To configure a channel’s TCP settings:

1.From the main menu, click Connection for either Channel 1 or Channel 2 to display the Connection Settings page for the selected channel.

2.In the available fields, enter the following information:

Note: See Connection Settings - UDP for UDP connections.

Connect Protocol

Protocol

Select TCP from the pull-down menu.

WiBox® 2100E Device Server User Guide 35