Lantronix 2100E manual Connect Mode Option

7: Setup Mode: Channel Configuration

Connect Mode

Connect Mode defines how the unit makes a connection, and how it reacts to incoming connections over the network. The default setting is C0.

ConnectMode (C0) ? _

Enter Connect Mode options in hexadecimal notation.

Note: All bit positions in the table that are blank represent “don’t care” bits for that particular option; they can be set to either a 0 or 1 value.

Table 7-5. Connect Mode Options

Connect Mode Option	7	6	5	4	3	2	1	0
a) Incoming Connection
Never accept incoming	0	0	0
Accept with active Modem Control In	0	1	0
Always Accept	1	1	0
b) Response
Nothing (quiet)				0
Character response (C=connect, D=disconnect,				1
N=unreachable)
c) Active Startup
No active startup					0	0	0	0
With any character					0	0	0	1
With active Modem Control In					0	0	1	0
With a specific start character					0	0	1	1
Manual connection					0	1	0	0
Autostart					0	1	0	1
Hostlist	0	0	1	0
d) Datagram Type
Directed UDP					1	1	0	0
e) Modem Mode
No Echo			0	0		1	1
Data Echo & Modem Response (Numeric)			0	1		1	1	1
Data Echo & Modem Response (Verbose)			0	1		1	1	0
Modem Response Only (Numeric)			0	0	1	1	1	1
Modem Response Only (Verbose)			0	0	1	1	1	0

WiBox® 2100E Device Server User Guide 52