Lantronix 2100E manual Datagram Mode, Datagram Type, Use Broadcast, Device Address Table

4: Web Manager Configuration

Figure 4-7. UDP Connection Settings

2. In the available fields, enter the following information:

Datagram Mode

Datagram Type	Configures remote IP or network broadcast address and the remote
	port. Enter 01 for directed or broadcast UDP. The default setting is 00.
Accept Incoming	Select Yes to accept incoming UDP datagrams.

Endpoint Configuration

Local Port	Enter the local port number.
Remote Port	Enter the port number of the remote device.
Remote Host	Enter the IP address of the remote device.
Use Broadcast	Select to broadcast the UDP datagram. Datagrams of type 01 can be
	sent as a broadcast by enabling this option. The default is not to
	broadcast.
	Note: Datagrams are sent as subnet-directed broadcasts.
Device Address Table	Enter values in the range 1-255 to identify units on the local network of
	device servers.
	Note: Lantronix Tech Support supports Datagram type 01. Datagram
	type FD is for OEM use. This table is enabled when Datagram Type is
	set to FD.

WiBox® 2100E Device Server User Guide 39