Lantronix 2100E manual Default Settings Option, Channel 1 Configuration, Channel 2 Configuration

8: Setup Mode: Advanced Settings

Enable Enhanced Password (Y) ? _

The Y (Yes) option allows an extended security password of 16-characters for protecting Telnet access.

Default Settings (Option 7)

Select 7 Defaults from the Change Setup menu to reset the unit’s Channel 1 configuration, Channel 2 configuration, Security, and Expert settings to the factory default settings.

The server configuration settings for IP address, gateway IP address, and netmask remain unchanged. See footnote for the WLAN settings that change.

Defaults for all settings are listed below.

Channel 1 Configuration

Baudrate	9600
I/F Mode	4C (1 stop bit, no parity, 8 bit, RS-232C)
Port No	10001
Connect Mode	C0 (always accept incoming connection; no active
	connection startup)
Hostlist Retry Counter	3
Hostlist Retry Timeout	250 (msec)
Send Character	0x0D (CR)
All other parameters	0

Channel 2 Configuration

Baudrate	9600
I/F Mode	4C (1 stop bit, no parity, 8 bit, RS-232C)
Port No	10002
Connect Mode	C0 (always accept incoming connection; no active
	connection startup)
Hostlist Retry Counter	3
Hostlist Retry Timeout	250 (msec)
Send Character	0x0D (CR)
All other parameters	0

WLAN Settings

Topology

1 (AdHoc)

WiBox® 2100E Device Server User Guide 72