EnGenius Technologies EOC5611P user manual Logging Method

Page 13

3.2 Logging Method

After complete the IP settings from last section, you can now access the web-based configuration menu.

1. Open web browser

2. Enter IP 192.168.1.1 into you address filter.

Auction: If you have changed the EOC5611P LAN IP address, make sure you enter the correct IP Address.

3.After connected to the EOC5611P successfully, browser will pop out a Windows Security window. Please enter the correct Username and Password.

4.The default Username and Password are both admin.

Auction: If you have changed the Username and Password, please enter your own Username and Password.

12

Image 13
Contents EOC5611P Table of Contents Network Configuration Example Product Overview FeatureWired LAN backup Wireless extensions to Ethernet networksTraining/Educational facilities Fully support all types of security typesBenefits System Requirement Package ContentsHardware Overview Red Bad Quality Access Point with WDS Function EOC5611P Multi-Function Instruction Guide Access PointWDS Bridge Client BridgeClient Router Computer Settings Assign a Static IP Logging Method Page Wireless Settings Access Point Mode → Wireless Network Save / Cancel Wireless SecuritySuppressed Ssid Station SeparationClient Bridge Mode → Wireless Network WDS Bridge Mode → Wireless Network MAC Address Client Router Mode → Wireless Network 1 WEP Wireless Security Settings3 WPA2-PSK WPA-PSKWPA-PSK Mixed Radius Server 5 WPARadius Port Radius Secret6 WPA2 WPA Mixed Radius Accounting Wireless → Wireless Advanced SettingsProtection Mode Transmit PowerWireless Traffic Shaping Data RateACL Mode Wireless → Wireless MAC FilterMAC Address Filter AddWireless → WDS Link Settings System → IP Settings LAN SettingsSystem → Spanning Tree Settings Router → WAN Settings Router SettingsWAN Settings → Static IP Account Name Internet Connection TypeDomain Name IP Subnet MaskPage Get Automatically From WAN Settings → Dhcp Dynamic IPUse These DNS Servers Apply / Cancel Login WAN Settings → PPPoE Point-to-Point Protocol over EthernetPassword Service NameKeep Alive Connect on DemandWAN Settings → Pptp Point-to-Point Tunneling Protocol Username Pptp ServerRouter → LAN Settings Pptp Pass Through Router → VPN Pass ThroughL2TP Pass Through IPSec Pass ThroughAdd Entry Router → Port ForwardingProtocol Starting PortStatus → Main Information StatusPage Status → Wireless Client List Status → System Log Status → WDS Link Status Status → Connection Status Status → Dhcp Client Table Management → Administration Management SettingsConfirm Password NameRemote Management Remote UpgradePort Management Vlan ID Management → Management VlanManagement → Snmp Settings Management → Backup/Restore Settings Management → Firmware Upgrade Manually Set Date Time Management → Time SettingsAutomatically Get Date Syslog Management → LogLog Server IP Address Local LogManagement → Diagnostics Access Point Network Configuration ExampleWDS Bridge Mode Client Bridge ModeWDS Bridge Client Router Vlan Configuration Guide Page Page Page Federal Communication Commission Interference Statement Appendix a FCC Interference Statement