EnGenius Technologies EOC5611P user manual

Page 14

4 Wireless Settings

4.1 Switching Operation Mode (System → System Properties)

The EOC5611P supports 4 different operation modes: Access Point, Client Bridge, WDS Bridge, and Client Router.

Click System Properties under System Section to begin.

.

Device Name: Specify a name for the device, but it is not the broadcast SSID. It will be shown in

SNMP management.

Country/Region: Select a Country/Region to conform local regulation.

Operation Mode: Select an operation mode via Radio Button.

Click Apply to save the changes.

Note: If you would like to use Access Point with WDS Function mode, please select Access Point

13

Image 14

Contents EOC5611P Table of Contents Network Configuration Example Feature Product OverviewTraining/Educational facilities Wireless extensions to Ethernet networksWired LAN backup Fully support all types of security typesBenefits Hardware Overview Package ContentsSystem Requirement Red Bad Quality EOC5611P Multi-Function Instruction Guide Access Point Access Point with WDS FunctionClient Bridge WDS BridgeClient Router Computer Settings Assign a Static IP Logging Method Page Wireless Settings Access Point Mode → Wireless Network Suppressed Ssid Wireless SecuritySave / Cancel Station SeparationClient Bridge Mode → Wireless Network WDS Bridge Mode → Wireless Network MAC Address Client Router Mode → Wireless Network Wireless Security Settings 1 WEPWPA-PSK 3 WPA2-PSKWPA-PSK Mixed Radius Port 5 WPARadius Server Radius Secret6 WPA2 WPA Mixed Wireless → Wireless Advanced Settings Radius AccountingWireless Traffic Shaping Transmit PowerProtection Mode Data RateMAC Address Filter Wireless → Wireless MAC FilterACL Mode AddWireless → WDS Link Settings LAN Settings System → IP SettingsSystem → Spanning Tree Settings WAN Settings → Static IP Router SettingsRouter → WAN Settings Domain Name Internet Connection TypeAccount Name IP Subnet MaskPage Use These DNS Servers WAN Settings → Dhcp Dynamic IPGet Automatically From Apply / Cancel Password WAN Settings → PPPoE Point-to-Point Protocol over EthernetLogin Service NameConnect on Demand Keep AliveWAN Settings → Pptp Point-to-Point Tunneling Protocol Pptp Server UsernameRouter → LAN Settings L2TP Pass Through Router → VPN Pass ThroughPptp Pass Through IPSec Pass ThroughProtocol Router → Port ForwardingAdd Entry Starting PortInformation Status Status → MainPage Status → Wireless Client List Status → System Log Status → WDS Link Status Status → Connection Status Status → Dhcp Client Table Confirm Password Management SettingsManagement → Administration NamePort Remote UpgradeRemote Management Management → Management Vlan Management Vlan IDManagement → Snmp Settings Management → Backup/Restore Settings Management → Firmware Upgrade Automatically Get Date Management → Time SettingsManually Set Date Time Log Server IP Address Management → LogSyslog Local LogManagement → Diagnostics Network Configuration Example Access PointClient Bridge Mode WDS Bridge ModeWDS Bridge Client Router Vlan Configuration Guide Page Page Page Appendix a FCC Interference Statement Federal Communication Commission Interference Statement