EnGenius Technologies EOC5611P user manual Network Configuration Example, Access Point

Page 61

9 Network Configuration Example

This chapter describes the role of the EOC5611P with 4 different modes. The Access Point mode’s default configuration is a central unit of the wireless network or as a root device of the wired environment.

9.1 Access Point

Access Point

Step1	Login to the web-based configuration interface with default IP 192.168.1.1

Step2	Select your country or region’s regulation.

Step3	802.11a/b/g wireless network

Step4	Use site survey to scan channels that have been used in nearby area.

Step5	Select channel with less interferences.

	Specify the SSID for your broadcast SSID and you can also configure multiple SSID at
Step6
	the same time.

Step7	Verify VLAN identifier to separate services among clients

Step8	Setup the authentication settings.

Step9	Press Apply to save all changes.

Note: For more advanced settings, please refer to the previous chapters.

Wireless Client

Step1	Select wireless mode you would like to associate with.

Step2	Use site survey to scan nearby Access Point and select the certain AP you would like

	60

Image 61

Contents EOC5611P Table of Contents Network Configuration Example Product Overview FeatureWired LAN backup Wireless extensions to Ethernet networksTraining/Educational facilities Fully support all types of security typesBenefits System Requirement Package ContentsHardware Overview Red Bad Quality Access Point with WDS Function EOC5611P Multi-Function Instruction Guide Access PointWDS Bridge Client BridgeClient Router Computer Settings Assign a Static IP Logging Method Page Wireless Settings Access Point Mode → Wireless Network Save / Cancel Wireless SecuritySuppressed Ssid Station SeparationClient Bridge Mode → Wireless Network WDS Bridge Mode → Wireless Network MAC Address Client Router Mode → Wireless Network 1 WEP Wireless Security Settings3 WPA2-PSK WPA-PSKWPA-PSK Mixed Radius Server 5 WPARadius Port Radius Secret6 WPA2 WPA Mixed Radius Accounting Wireless → Wireless Advanced SettingsProtection Mode Transmit PowerWireless Traffic Shaping Data RateACL Mode Wireless → Wireless MAC FilterMAC Address Filter AddWireless → WDS Link Settings System → IP Settings LAN SettingsSystem → Spanning Tree Settings Router → WAN Settings Router SettingsWAN Settings → Static IP Account Name Internet Connection TypeDomain Name IP Subnet MaskPage Get Automatically From WAN Settings → Dhcp Dynamic IPUse These DNS Servers Apply / Cancel Login WAN Settings → PPPoE Point-to-Point Protocol over EthernetPassword Service NameKeep Alive Connect on DemandWAN Settings → Pptp Point-to-Point Tunneling Protocol Username Pptp ServerRouter → LAN Settings Pptp Pass Through Router → VPN Pass ThroughL2TP Pass Through IPSec Pass ThroughAdd Entry Router → Port ForwardingProtocol Starting PortStatus → Main Information StatusPage Status → Wireless Client List Status → System Log Status → WDS Link Status Status → Connection Status Status → Dhcp Client Table Management → Administration Management SettingsConfirm Password NameRemote Management Remote UpgradePort Management Vlan ID Management → Management VlanManagement → Snmp Settings Management → Backup/Restore Settings Management → Firmware Upgrade Manually Set Date Time Management → Time SettingsAutomatically Get Date Syslog Management → LogLog Server IP Address Local LogManagement → Diagnostics Access Point Network Configuration ExampleWDS Bridge Mode Client Bridge ModeWDS Bridge Client Router Vlan Configuration Guide Page Page Page Federal Communication Commission Interference Statement Appendix a FCC Interference Statement