EnGenius Technologies EOC5611P user manual WAN Settings → Dhcp Dynamic IP, Get Automatically From

Page 36

6.1.2 WAN Settings → DHCP (Dynamic IP)

Select DHCP as your WAN connection type to obtain your IP address automatically. You will need to

enter Account Name as your hostname and DNS (Optional).

Internet Connection Type

Select DHCP to begin configuration of the DHCP connection.

 

 

Account Name

Specify Account Name that is provided by ISP.

 

 

Domain Name

Specify Domain Name that is provided by ISP.

 

 

MTU

Specify the Maximum Transmit Unit size. Suggest remain in Auto.

 

 

Get Automatically From

Select the Radio button for get the DNS automatically from DHCP server.

ISP

 

 

 

Use These DNS Servers

Select the Radio button for setup the Primary DNS and Secondary DNS servers

 

manually.

 

 

Discard Ping on WAN

Place a Check to Enable or Disable ping from WAN.

 

 

 

35

Image 36
Contents EOC5611P Table of Contents Network Configuration Example Feature Product OverviewWireless extensions to Ethernet networks Wired LAN backupTraining/Educational facilities Fully support all types of security typesBenefits Package Contents System RequirementHardware Overview Red Bad Quality EOC5611P Multi-Function Instruction Guide Access Point Access Point with WDS FunctionClient Bridge WDS BridgeClient Router Computer Settings Assign a Static IP Logging Method Page Wireless Settings Access Point Mode → Wireless Network Wireless Security Save / CancelSuppressed Ssid Station SeparationClient Bridge Mode → Wireless Network WDS Bridge Mode → Wireless Network MAC Address Client Router Mode → Wireless Network Wireless Security Settings 1 WEPWPA-PSK 3 WPA2-PSKWPA-PSK Mixed 5 WPA Radius ServerRadius Port Radius Secret6 WPA2 WPA Mixed Wireless → Wireless Advanced Settings Radius AccountingTransmit Power Protection ModeWireless Traffic Shaping Data RateWireless → Wireless MAC Filter ACL ModeMAC Address Filter AddWireless → WDS Link Settings LAN Settings System → IP SettingsSystem → Spanning Tree Settings Router Settings Router → WAN SettingsWAN Settings → Static IP Internet Connection Type Account NameDomain Name IP Subnet MaskPage WAN Settings → Dhcp Dynamic IP Get Automatically FromUse These DNS Servers Apply / Cancel WAN Settings → PPPoE Point-to-Point Protocol over Ethernet LoginPassword Service NameConnect on Demand Keep AliveWAN Settings → Pptp Point-to-Point Tunneling Protocol Pptp Server UsernameRouter → LAN Settings Router → VPN Pass Through Pptp Pass ThroughL2TP Pass Through IPSec Pass ThroughRouter → Port Forwarding Add EntryProtocol Starting PortInformation Status Status → MainPage Status → Wireless Client List Status → System Log Status → WDS Link Status Status → Connection Status Status → Dhcp Client Table Management Settings Management → AdministrationConfirm Password NameRemote Upgrade Remote ManagementPort Management → Management Vlan Management Vlan IDManagement → Snmp Settings Management → Backup/Restore Settings Management → Firmware Upgrade Management → Time Settings Manually Set Date TimeAutomatically Get Date Management → Log SyslogLog Server IP Address Local LogManagement → Diagnostics Network Configuration Example Access PointClient Bridge Mode WDS Bridge ModeWDS Bridge Client Router Vlan Configuration Guide Page Page Page Appendix a FCC Interference Statement Federal Communication Commission Interference Statement