EnGenius Technologies EOC5611P user manual

Page 68

6.Press Management VLAN to configure wired VID. Enter your desire VLAN ID and press Apply to configure the changes.

Auction: After press Apply, you must configure your Layer2 Switch or RADIUS Server with the same VLAN ID. Otherwise,

you cannot access to the device’s web-base configuration page.

7. For 802.1x authentication, you may construct your network as below diagram.

Note: EnGenius product supports maximum 4 different SSID with different VLAN ID.

67

Image 68

Contents EOC5611P Table of Contents Network Configuration Example Feature Product OverviewWireless extensions to Ethernet networks Wired LAN backupTraining/Educational facilities Fully support all types of security typesBenefits Hardware Overview Package ContentsSystem Requirement Red Bad Quality EOC5611P Multi-Function Instruction Guide Access Point Access Point with WDS FunctionClient Bridge WDS BridgeClient Router Computer Settings Assign a Static IP Logging Method Page Wireless Settings Access Point Mode → Wireless Network Wireless Security Save / CancelSuppressed Ssid Station SeparationClient Bridge Mode → Wireless Network WDS Bridge Mode → Wireless Network MAC Address Client Router Mode → Wireless Network Wireless Security Settings 1 WEPWPA-PSK 3 WPA2-PSKWPA-PSK Mixed 5 WPA Radius ServerRadius Port Radius Secret6 WPA2 WPA Mixed Wireless → Wireless Advanced Settings Radius AccountingTransmit Power Protection ModeWireless Traffic Shaping Data RateWireless → Wireless MAC Filter ACL ModeMAC Address Filter AddWireless → WDS Link Settings LAN Settings System → IP SettingsSystem → Spanning Tree Settings WAN Settings → Static IP Router SettingsRouter → WAN Settings Internet Connection Type Account NameDomain Name IP Subnet MaskPage Use These DNS Servers WAN Settings → Dhcp Dynamic IPGet Automatically From Apply / Cancel WAN Settings → PPPoE Point-to-Point Protocol over Ethernet LoginPassword Service NameConnect on Demand Keep AliveWAN Settings → Pptp Point-to-Point Tunneling Protocol Pptp Server UsernameRouter → LAN Settings Router → VPN Pass Through Pptp Pass ThroughL2TP Pass Through IPSec Pass ThroughRouter → Port Forwarding Add EntryProtocol Starting PortInformation Status Status → MainPage Status → Wireless Client List Status → System Log Status → WDS Link Status Status → Connection Status Status → Dhcp Client Table Management Settings Management → AdministrationConfirm Password NamePort Remote UpgradeRemote Management Management → Management Vlan Management Vlan IDManagement → Snmp Settings Management → Backup/Restore Settings Management → Firmware Upgrade Automatically Get Date Management → Time SettingsManually Set Date Time Management → Log SyslogLog Server IP Address Local LogManagement → Diagnostics Network Configuration Example Access PointClient Bridge Mode WDS Bridge ModeWDS Bridge Client Router Vlan Configuration Guide Page Page Page Appendix a FCC Interference Statement Federal Communication Commission Interference Statement