EnGenius Technologies EOC5611P user manual Router → LAN Settings

Page 42

6.2 Router → LAN Settings

	IP Address	Specify LAN port IP address.

	IP Subnet Mask	Specify LAN IP Subnet Mask.

	WINS Server IP	Specify WINS Server IP.

	Use Router As DHCP	Place a Check to enable DHCP server.
	Server	Place a Check to enable DHCP server.
	Server

	Starting IP Address	Specify DHCP server starting IP address.

	Ending IP Address	Specify DHCP server ending IP address.

	Apply / Cancel	Press Apply to apply the changes or Cancel to return previous settings.

Auction: If you uncheck the DHCP Server function, you must configure you IP Address manually. The

instruction please refers to the Computer Settings section.

41

Image 42

Contents EOC5611P Table of Contents Network Configuration Example Feature Product OverviewTraining/Educational facilities Wireless extensions to Ethernet networksWired LAN backup Fully support all types of security typesBenefits Package Contents System RequirementHardware Overview Red Bad Quality EOC5611P Multi-Function Instruction Guide Access Point Access Point with WDS FunctionClient Bridge WDS BridgeClient Router Computer Settings Assign a Static IP Logging Method Page Wireless Settings Access Point Mode → Wireless Network Suppressed Ssid Wireless SecuritySave / Cancel Station SeparationClient Bridge Mode → Wireless Network WDS Bridge Mode → Wireless Network MAC Address Client Router Mode → Wireless Network Wireless Security Settings 1 WEPWPA-PSK 3 WPA2-PSKWPA-PSK Mixed Radius Port 5 WPARadius Server Radius Secret6 WPA2 WPA Mixed Wireless → Wireless Advanced Settings Radius AccountingWireless Traffic Shaping Transmit PowerProtection Mode Data RateMAC Address Filter Wireless → Wireless MAC FilterACL Mode AddWireless → WDS Link Settings LAN Settings System → IP SettingsSystem → Spanning Tree Settings Router Settings Router → WAN SettingsWAN Settings → Static IP Domain Name Internet Connection TypeAccount Name IP Subnet MaskPage WAN Settings → Dhcp Dynamic IP Get Automatically FromUse These DNS Servers Apply / Cancel Password WAN Settings → PPPoE Point-to-Point Protocol over EthernetLogin Service NameConnect on Demand Keep AliveWAN Settings → Pptp Point-to-Point Tunneling Protocol Pptp Server UsernameRouter → LAN Settings L2TP Pass Through Router → VPN Pass ThroughPptp Pass Through IPSec Pass ThroughProtocol Router → Port ForwardingAdd Entry Starting PortInformation Status Status → MainPage Status → Wireless Client List Status → System Log Status → WDS Link Status Status → Connection Status Status → Dhcp Client Table Confirm Password Management SettingsManagement → Administration NameRemote Upgrade Remote ManagementPort Management → Management Vlan Management Vlan IDManagement → Snmp Settings Management → Backup/Restore Settings Management → Firmware Upgrade Management → Time Settings Manually Set Date TimeAutomatically Get Date Log Server IP Address Management → LogSyslog Local LogManagement → Diagnostics Network Configuration Example Access PointClient Bridge Mode WDS Bridge ModeWDS Bridge Client Router Vlan Configuration Guide Page Page Page Appendix a FCC Interference Statement Federal Communication Commission Interference Statement