EnGenius Technologies EOC5611P user manual Management Settings, Management → Administration, Name

Page 52

8 Management Settings

Management section is on the navigation drop-down menu. You will then see seven options: administration, management VLAN, SNMP settings, backup/restore settings, firmware upgrade, time settings, and log. Each option is described below.

8.1 Management → Administration

Click on the Administration link under the Management menu. This option allows you to create a user name and password for the device. By default, this device is configured with a user name and password admin. For security reasons it is highly recommended that you create a new user name and password.

Name	Specify Username for login.

Password	Specify a Password for login

Confirm Password	Re-enter the Password for confirmation.

Remote Management Select the Radio button to Enable or Disable Remote Management.

51

Image 52

Contents EOC5611P Table of Contents Network Configuration Example Feature Product OverviewWireless extensions to Ethernet networks Wired LAN backupTraining/Educational facilities Fully support all types of security typesBenefits System Requirement Package ContentsHardware Overview Red Bad Quality EOC5611P Multi-Function Instruction Guide Access Point Access Point with WDS FunctionClient Bridge WDS BridgeClient Router Computer Settings Assign a Static IP Logging Method Page Wireless Settings Access Point Mode → Wireless Network Wireless Security Save / CancelSuppressed Ssid Station SeparationClient Bridge Mode → Wireless Network WDS Bridge Mode → Wireless Network MAC Address Client Router Mode → Wireless Network Wireless Security Settings 1 WEPWPA-PSK 3 WPA2-PSKWPA-PSK Mixed 5 WPA Radius ServerRadius Port Radius Secret6 WPA2 WPA Mixed Wireless → Wireless Advanced Settings Radius AccountingTransmit Power Protection ModeWireless Traffic Shaping Data RateWireless → Wireless MAC Filter ACL ModeMAC Address Filter AddWireless → WDS Link Settings LAN Settings System → IP SettingsSystem → Spanning Tree Settings Router → WAN Settings Router SettingsWAN Settings → Static IP Internet Connection Type Account NameDomain Name IP Subnet MaskPage Get Automatically From WAN Settings → Dhcp Dynamic IPUse These DNS Servers Apply / Cancel WAN Settings → PPPoE Point-to-Point Protocol over Ethernet LoginPassword Service NameConnect on Demand Keep AliveWAN Settings → Pptp Point-to-Point Tunneling Protocol Pptp Server UsernameRouter → LAN Settings Router → VPN Pass Through Pptp Pass ThroughL2TP Pass Through IPSec Pass ThroughRouter → Port Forwarding Add EntryProtocol Starting PortInformation Status Status → MainPage Status → Wireless Client List Status → System Log Status → WDS Link Status Status → Connection Status Status → Dhcp Client Table Management Settings Management → AdministrationConfirm Password NameRemote Management Remote UpgradePort Management → Management Vlan Management Vlan IDManagement → Snmp Settings Management → Backup/Restore Settings Management → Firmware Upgrade Manually Set Date Time Management → Time SettingsAutomatically Get Date Management → Log SyslogLog Server IP Address Local LogManagement → Diagnostics Network Configuration Example Access PointClient Bridge Mode WDS Bridge ModeWDS Bridge Client Router Vlan Configuration Guide Page Page Page Appendix a FCC Interference Statement Federal Communication Commission Interference Statement