EnGenius Technologies EOC5611P user manual Client Router Mode → Wireless Network, Site Survey

Page 20

4.2.4 Client Router Mode → Wireless Network

Wireless Mode

EOC5611P supports 802.11a/b/g wireless band.

 

 

SSID

Specify the SSID if known. SSID text box will be automatically fill in when select an AP

 

in the Site Survey.

 

 

Site Survey

Using Site Survey to scan nearby APs and then select the AP to establish the

 

connection.

Prefer BSSID

Specify the MAC address if known. Prefer BSSID text box will be automatically fill in when select an AP in the Site Survey.

WDS Client

Place a Radio button to Enable / Disable WDS Client.

 

 

Apply / Cancel

Press Apply to apply the changes or Cancel to return previous settings.

 

 

Profile

After Site Survey, webpage will display all nearby area’s Access Point. Click the BSSID

 

if you would like to connect with it.

 

 

Wireless Security

Please refer to the Wireless Security section.

 

 

Refresh

Press Refresh to scan again.

 

 

Auction: If the Access Point is suppressed its owned SSID, SSID section will be blank, the SSID must be

19

Image 20
Contents EOC5611P Table of Contents Network Configuration Example Feature Product OverviewWireless extensions to Ethernet networks Wired LAN backupTraining/Educational facilities Fully support all types of security typesBenefits Hardware Overview Package ContentsSystem Requirement Red Bad Quality EOC5611P Multi-Function Instruction Guide Access Point Access Point with WDS FunctionClient Bridge WDS BridgeClient Router Computer Settings Assign a Static IP Logging Method Page Wireless Settings Access Point Mode → Wireless Network Wireless Security Save / CancelSuppressed Ssid Station SeparationClient Bridge Mode → Wireless Network WDS Bridge Mode → Wireless Network MAC Address Client Router Mode → Wireless Network Wireless Security Settings 1 WEPWPA-PSK 3 WPA2-PSKWPA-PSK Mixed 5 WPA Radius ServerRadius Port Radius Secret6 WPA2 WPA Mixed Wireless → Wireless Advanced Settings Radius AccountingTransmit Power Protection ModeWireless Traffic Shaping Data RateWireless → Wireless MAC Filter ACL ModeMAC Address Filter AddWireless → WDS Link Settings LAN Settings System → IP SettingsSystem → Spanning Tree Settings WAN Settings → Static IP Router SettingsRouter → WAN Settings Internet Connection Type Account NameDomain Name IP Subnet MaskPage Use These DNS Servers WAN Settings → Dhcp Dynamic IPGet Automatically From Apply / Cancel WAN Settings → PPPoE Point-to-Point Protocol over Ethernet LoginPassword Service NameConnect on Demand Keep AliveWAN Settings → Pptp Point-to-Point Tunneling Protocol Pptp Server UsernameRouter → LAN Settings Router → VPN Pass Through Pptp Pass ThroughL2TP Pass Through IPSec Pass ThroughRouter → Port Forwarding Add EntryProtocol Starting PortInformation Status Status → MainPage Status → Wireless Client List Status → System Log Status → WDS Link Status Status → Connection Status Status → Dhcp Client Table Management Settings Management → AdministrationConfirm Password NamePort Remote UpgradeRemote Management Management → Management Vlan Management Vlan IDManagement → Snmp Settings Management → Backup/Restore Settings Management → Firmware Upgrade Automatically Get Date Management → Time SettingsManually Set Date Time Management → Log SyslogLog Server IP Address Local LogManagement → Diagnostics Network Configuration Example Access PointClient Bridge Mode WDS Bridge ModeWDS Bridge Client Router Vlan Configuration Guide Page Page Page Appendix a FCC Interference Statement Federal Communication Commission Interference Statement