EnGenius Technologies EOC5611P user manual WDS Bridge

Page 63

WDS Bridge

Step1	Login to the web-based configuration interface with default IP 192.168.1.1

Step2	Select your country or region’s regulation.

Step3	Select Operation Mode to WDS Bridge from System Properties.

Step4	802.11a/b/g wireless network.

Step5	Select channel you would like to use.

Step6	Setup the authentication settings

Step7	Setup WDS Link Settings.

Step8	Specify the AP’s MAC address you would like to connect with.

Step9	Press Apply to process all the configurations.

Auction: Each WDS bridge’s device must use the same Subnet, Wireless Mode, Wireless Channel, and Security Setting.

9.4 Client Router

In the Client Router Mode, the EOC5611P has DHCP Server build inside that allows many LANs automatically generate an IP address to share the same Internet. Connect an AP/WISP Wirelessly and connect to LANs via wired. Client Router Mode is act completely opposite to the AP Router Mode.

62

Image 63

Contents EOC5611P Table of Contents Network Configuration Example Product Overview FeatureFully support all types of security types Wireless extensions to Ethernet networksWired LAN backup Training/Educational facilitiesBenefits Package Contents System RequirementHardware Overview Red Bad Quality Access Point with WDS Function EOC5611P Multi-Function Instruction Guide Access PointWDS Bridge Client BridgeClient Router Computer Settings Assign a Static IP Logging Method Page Wireless Settings Access Point Mode → Wireless Network Station Separation Wireless SecuritySave / Cancel Suppressed SsidClient Bridge Mode → Wireless Network WDS Bridge Mode → Wireless Network MAC Address Client Router Mode → Wireless Network 1 WEP Wireless Security Settings3 WPA2-PSK WPA-PSKWPA-PSK Mixed Radius Secret 5 WPARadius Server Radius Port6 WPA2 WPA Mixed Radius Accounting Wireless → Wireless Advanced SettingsData Rate Transmit PowerProtection Mode Wireless Traffic ShapingAdd Wireless → Wireless MAC FilterACL Mode MAC Address FilterWireless → WDS Link Settings System → IP Settings LAN SettingsSystem → Spanning Tree Settings Router Settings Router → WAN SettingsWAN Settings → Static IP IP Subnet Mask Internet Connection TypeAccount Name Domain NamePage WAN Settings → Dhcp Dynamic IP Get Automatically FromUse These DNS Servers Apply / Cancel Service Name WAN Settings → PPPoE Point-to-Point Protocol over EthernetLogin PasswordKeep Alive Connect on DemandWAN Settings → Pptp Point-to-Point Tunneling Protocol Username Pptp ServerRouter → LAN Settings IPSec Pass Through Router → VPN Pass ThroughPptp Pass Through L2TP Pass ThroughStarting Port Router → Port ForwardingAdd Entry ProtocolStatus → Main Information StatusPage Status → Wireless Client List Status → System Log Status → WDS Link Status Status → Connection Status Status → Dhcp Client Table Name Management SettingsManagement → Administration Confirm PasswordRemote Upgrade Remote ManagementPort Management Vlan ID Management → Management VlanManagement → Snmp Settings Management → Backup/Restore Settings Management → Firmware Upgrade Management → Time Settings Manually Set Date TimeAutomatically Get Date Local Log Management → LogSyslog Log Server IP AddressManagement → Diagnostics Access Point Network Configuration ExampleWDS Bridge Mode Client Bridge ModeWDS Bridge Client Router Vlan Configuration Guide Page Page Page Federal Communication Commission Interference Statement Appendix a FCC Interference Statement