EnGenius Technologies EOC5611P user manual 5 WPA, Radius Server, Radius Port, Radius Secret

Page 24

4.3.5 WPA

WPA security mode is for 802.1x authentication. You must provide a RADIUS Server to check the

permission of access the network.

Security Mode

Select WPA from the drop down list to begin the configuration.

 

 

Encryption

Select Auto, TKIP or AES for Encryption type.

 

 

Radius Server

Specify Radius Server IP Address.

 

 

Radius Port

Specify Radius Port number, the default port is 1812.

 

 

Radius Secret

Specify Radius Secret that is given by the Radius Server.

 

 

Group Key Update

Specify Group Key Update Interval time.

Interval

 

 

 

Group Key Update

Specify Group Key Update Timeout time.

Timeout

 

 

 

Pairwise Key Update

Specify Pairwise Key Update Timeout time.

Interval

 

 

 

Radius Accounting

Select Enable or Disable Radius Accounting. The detail of Radius Accounting is at

 

next section.

 

 

23

Page 23 Page 25
Image 24
Page 23 Page 25
Contents EOC5611P Table of Contents Network Configuration Example Feature Product OverviewWireless extensions to Ethernet networks Wired LAN backupTraining/Educational facilities Fully support all types of security typesBenefits Package Contents System RequirementHardware Overview Red Bad Quality EOC5611P Multi-Function Instruction Guide Access Point Access Point with WDS FunctionClient Bridge WDS BridgeClient Router Computer Settings Assign a Static IP Logging Method Page Wireless Settings Access Point Mode → Wireless Network Wireless Security Save / CancelSuppressed Ssid Station SeparationClient Bridge Mode → Wireless Network WDS Bridge Mode → Wireless Network MAC Address Client Router Mode → Wireless Network Wireless Security Settings 1 WEPWPA-PSK 3 WPA2-PSKWPA-PSK Mixed 5 WPA Radius ServerRadius Port Radius Secret6 WPA2 WPA Mixed Wireless → Wireless Advanced Settings Radius AccountingTransmit Power Protection ModeWireless Traffic Shaping Data RateWireless → Wireless MAC Filter ACL ModeMAC Address Filter AddWireless → WDS Link Settings LAN Settings System → IP SettingsSystem → Spanning Tree Settings Router Settings Router → WAN SettingsWAN Settings → Static IP Internet Connection Type Account NameDomain Name IP Subnet MaskPage WAN Settings → Dhcp Dynamic IP Get Automatically FromUse These DNS Servers Apply / Cancel WAN Settings → PPPoE Point-to-Point Protocol over Ethernet LoginPassword Service NameConnect on Demand Keep AliveWAN Settings → Pptp Point-to-Point Tunneling Protocol Pptp Server UsernameRouter → LAN Settings Router → VPN Pass Through Pptp Pass ThroughL2TP Pass Through IPSec Pass ThroughRouter → Port Forwarding Add EntryProtocol Starting PortInformation Status Status → MainPage Status → Wireless Client List Status → System Log Status → WDS Link Status Status → Connection Status Status → Dhcp Client Table Management Settings Management → AdministrationConfirm Password NameRemote Upgrade Remote ManagementPort Management → Management Vlan Management Vlan IDManagement → Snmp Settings Management → Backup/Restore Settings Management → Firmware Upgrade Management → Time Settings Manually Set Date TimeAutomatically Get Date Management → Log SyslogLog Server IP Address Local LogManagement → Diagnostics Network Configuration Example Access PointClient Bridge Mode WDS Bridge ModeWDS Bridge Client Router Vlan Configuration Guide Page Page Page Appendix a FCC Interference Statement Federal Communication Commission Interference Statement
Top Page Image Contents