EnGenius Technologies EOC5611P Router Settings, Router → WAN Settings, WAN Settings → Static IP

Page 33

6 Router Settings

This section is only available for AP Router Mode and Client Router Mode.

6.1 Router → WAN Settings

There are four different types of WAN connection: Static IP, DHCP, PPPoE and PPTP. Please contact your ISP to select the connection type.

6.1.1 WAN Settings → Static IP

Select Static IP in WAN connection if your ISP gives all the information about IP address, Subnet Mask, Default Gateway, Primary DNS and Secondary DNS.

32

Image 33

Contents EOC5611P Table of Contents Network Configuration Example Product Overview FeatureWired LAN backup Wireless extensions to Ethernet networksTraining/Educational facilities Fully support all types of security typesBenefits Package Contents System RequirementHardware Overview Red Bad Quality Access Point with WDS Function EOC5611P Multi-Function Instruction Guide Access PointWDS Bridge Client BridgeClient Router Computer Settings Assign a Static IP Logging Method Page Wireless Settings Access Point Mode → Wireless Network Save / Cancel Wireless SecuritySuppressed Ssid Station SeparationClient Bridge Mode → Wireless Network WDS Bridge Mode → Wireless Network MAC Address Client Router Mode → Wireless Network 1 WEP Wireless Security Settings3 WPA2-PSK WPA-PSKWPA-PSK Mixed Radius Server 5 WPARadius Port Radius Secret6 WPA2 WPA Mixed Radius Accounting Wireless → Wireless Advanced SettingsProtection Mode Transmit PowerWireless Traffic Shaping Data RateACL Mode Wireless → Wireless MAC FilterMAC Address Filter Add Wireless → WDS Link Settings System → IP Settings LAN SettingsSystem → Spanning Tree Settings Router Settings Router → WAN SettingsWAN Settings → Static IP Account Name Internet Connection TypeDomain Name IP Subnet MaskPage WAN Settings → Dhcp Dynamic IP Get Automatically FromUse These DNS Servers Apply / Cancel Login WAN Settings → PPPoE Point-to-Point Protocol over EthernetPassword Service NameKeep Alive Connect on DemandWAN Settings → Pptp Point-to-Point Tunneling Protocol Username Pptp ServerRouter → LAN Settings Pptp Pass Through Router → VPN Pass ThroughL2TP Pass Through IPSec Pass ThroughAdd Entry Router → Port ForwardingProtocol Starting PortStatus → Main Information StatusPage Status → Wireless Client List Status → System Log Status → WDS Link Status Status → Connection Status Status → Dhcp Client Table Management → Administration Management SettingsConfirm Password NameRemote Upgrade Remote ManagementPort Management Vlan ID Management → Management VlanManagement → Snmp Settings Management → Backup/Restore Settings Management → Firmware Upgrade Management → Time Settings Manually Set Date TimeAutomatically Get Date Syslog Management → LogLog Server IP Address Local LogManagement → Diagnostics Access Point Network Configuration ExampleWDS Bridge Mode Client Bridge ModeWDS Bridge Client Router Vlan Configuration Guide Page Page Page Federal Communication Commission Interference Statement Appendix a FCC Interference Statement