Enterasys Networks 2200 manual Unpacking the Device, Installing Options

Unpacking the Device

3.1UNPACKING THE DEVICE

Unpack the device as follows:

1.Open the box and remove the packing material protecting the 2H258-17R.

2.Verify the contents of the carton as listed in Table 3-1.

Table 3-1 Contents of 2H258-17R Carton

Item	Quantity
2H258-17R	1
Antistatic Wrist Strap	1
Console Cable Kit	1
Rackmount Kit	1
Strain-Relief Bracket	1
Manual Accessory Kit	1
Power Cord	2

3.Remove the tape seal on the non-conductive bag to remove the 2H258-17R.

4.Perform a visual inspection of the device for any signs of physical damage. Contact Enterasys Networks if there are any signs of damage. Refer to Section 1.2 for details.

3.2INSTALLING OPTIONS

NOTE: Install any optional equipment before proceeding to Section 3.3.

If the 2H258-17R is to be installed with an optional HSIM or VHSIM, refer to the user’s guide of that device for the installation instructions.

3-2Installation