Enterasys Networks 2200 manual Pwr

Using LANVIEW

Table 4-1describes the LED indications and provides recommended actions as appropriate.

Refer to the HSIM or VHSIM user’s guide for a description of the HSIM or VHSIM LED indications.

NOTE: The terms flashing, blinking, and solid used in Table 4-1indicate the following: Flashing indicates an LED is flashing randomly.

Blinking indicates an LED is flashing at a steady rate (approximately 50% on, 50% off). Solid indicates a steady LED light. No pulsing.

Table 4-1 LANVIEW LEDs

LED Color State Recommended Action

PWR	Off	Device electronics not
		receiving power from
		power supply(ies).

1.Ensure that the power cords are plugged in correctly and that there is power at the power source.

2.Contact Enterasys Networks for assistance.

Green	Functional. Power	None.
	supply(ies) operating
	normally.
Amber	Indicates loss of power	1. Ensure that the power cords are plugged
	supply redundancy.	in correctly and that there is power at the
		power source.
		2. Contact Enterasys Networks for
		assistance.

4-2Troubleshooting