Enterasys Networks 6H352-25 manual Is enabled and there is a

Using LANVIEW

Table 4-1 LANVIEW LEDs (Continued)

LED Color State Recommended Action

TX	Off	Port enabled, and no
(Transmit)		activity.
		Should flash green every
		two seconds indicating
		BPDUs being sent if STA
		is enabled and there is a
		valid link.

1.Ensure that the STA is enabled and that there is a valid link.

2.Contact Enterasys Networks for technical support.

Green	Flashing. Indicates	None.
	activity. Rate indicates
	data rate.
Amber	Blinking. Port in	1. Ensure that the port is not disabled.
	standby.	2. Contact Enterasys Networks for technical
	Port may be disabled due	support.
	to Spanning Tree.
Red	Flashing. Indicates	None, unless there is a high amount of
	collision rate.	activity. In this case, check for network
		configuration problems or a defective
		device.
	Solid. Diagnostic failure.	Contact Enterasys Networks for technical
		support.

4-4Troubleshooting