Cypress manual Features CY7C68013A/14A/15A/16A

Page 1

CY7C68013A, CY7C68014A

CY7C68015A, CY7C68016A

EZ-USB FX2LP™ USB Microcontroller High-Speed USB Peripheral Controller

1. Features (CY7C68013A/14A/15A/16A)

■USB 2.0 USB IF high-speed certified (TID # 40460272)

■Single chip integrated USB 2.0 transceiver, smart SIE, and enhanced 8051 microprocessor

■Fit, form and function compatible with the FX2

❐Pin compatible

❐Object-code-compatible

❐Functionally compatible (FX2LP is a superset)

■Ultra Low power: ICC no more than 85 mA in any mode

❐Ideal for bus and battery powered applications

■Software: 8051 code runs from:

❐Internal RAM, which is downloaded via USB

❐Internal RAM, which is loaded from EEPROM

❐External memory device (128 pin package)

■16 KBytes of on-chip Code/Data RAM

■Four programmable BULK/INTERRUPT/ISOCHRONOUS endpoints

❐Buffering options: double, triple, and quad

■Additional programmable (BULK/INTERRUPT) 64 byte endpoint

■8-bit or 16-bit external data interface

■Smart Media Standard ECC generation

■GPIF (General Programmable Interface)

❐Enables direct connection to most parallel interfaces

❐Programmable waveform descriptors and configuration reg- isters to define waveforms

❐Supports multiple Ready (RDY) inputs and Control (CTL) out- puts

■Integrated, industry standard enhanced 8051

❐48 MHz, 24 MHz, or 12 MHz CPU operation

❐Four clocks per instruction cycle

❐Two USARTS

❐Three counter/timers

❐Expanded interrupt system

❐Two data pointers

■3.3V operation with 5V tolerant inputs

■Vectored USB interrupts and GPIF/FIFO interrupts

■Separate data buffers for the Setup and Data portions of a CONTROL transfer

■Integrated I2C controller, runs at 100 or 400 kHz

■Four integrated FIFOs

❐Integrated glue logic and FIFOs lower system cost

❐Automatic conversion to and from 16-bit buses

❐Master or slave operation

❐Uses external clock or asynchronous strobes

❐Easy interface to ASIC and DSP ICs

■Available in Commercial and Industrial temperature grade (all packages except VFBGA)

Cypress Semiconductor Corporation • 198 Champion Court

•

San Jose, CA 95134-1709

• 408-943-2600

Document #: 38-08032 Rev. *L

 

Revised February 8, 2008

[+] Feedback

Page 1 Page 2
Image 1
Page 1 Page 2
Contents Cypress Semiconductor Corporation 198 Champion Court Features CY7C68013A/14A/15A/16AFeatures CY7C68013A/14A only Logic Block DiagramFeatures CY7C68015A/16A only Functional Overview ApplicationsBus-powered Applications USB Boot MethodsReNumeration Interrupt SystemPriority INT2VEC Value Source INT2 USB InterruptsFIFO/GPIF Interrupt INT4 Reset Pin Reset and WakeupProgram/Data RAM Reset Timing Values ConditionInternal Code Memory, EA = Inside FX2LP Outside FX2LPExternal Code Memory, EA = Register AddressesEndpoint Configurations High -speed Mode Setup Data BufferEndpoint RAM Size × 64 bytes Endpoints 0 × 512 bytesMaster/Slave Control Signals 12.5 Default Full-Speed Alternate SettingsExternal Fifo Interface ArchitectureECC Generation7 Autopointer AccessGpif USB Uploads and DownloadsCompatible with Previous Generation EZ-USB FX2 18 I2C ControllerPart Number Conversion Table Package Description20 CY7C68013A/14A and CY7C68015A/16A Differences Pin AssignmentsIfclk PE0 PE1128 Pin Tqfp CY7C68013A/CY7C68014ACY7C68013A/CY7C68014A CY7C68013A/CY7C68014A 56-pin Ssop Pin Assignment CY7C68013A/CY7C68014A 56-pin SsopCY7C68015A/CY7C68016A Pin QFN CY7C68013A 56-pin Vfbga Pin Assignment Top View CY7C68013A/15A Pin Descriptions FX2LP Pin Descriptions 128 100 56 VF Name Type DefaultFX2LP Pin Descriptions 56 VF Name Type Default DescriptionPort WU2 IFCONFIG1..0FIFOADR0 FIFOADR1PORTCCFG.0 GPIFADR0GPIFADR1 PORTCCFG.1T0OUT Port ET1OUT T2OUTINT6 RXD1OUTT2EX GPIFADR8Flagc FlagbCTL3 CTL4Ground FX2LP Register Summary Register SummaryRegister can only be reset, it cannot be set Epie EP0CS E6CB Flowstb DPL0 = both read/write bit Absolute Maximum Ratings Thermal CharacteristicsOperating Conditions ΘJc + θCaAC Electrical Characteristics DC CharacteristicsUSB Transceiver Clkout Program Memory ReadProgram Memory Read Parameters Description Min Typ Max Unit CLKOUT17 Data Memory ReadData Memory Read Parameters Description Min Typ Max Unit Stretch = Data Memory WriteData Memory Write Parameters Description Min Max Unit WR# Strobe Function when Portc is Accessed by Portc Strobe Feature TimingsGpif Synchronous Signals Timing Diagram20 Gpif Synchronous SignalsSlave Fifo Synchronous Read Slave Fifo Synchronous Read Timing Diagram20Slave Fifo Asynchronous Read Slave Fifo Asynchronous Read Timing Diagram20Slave Fifo Synchronous Write Slave Fifo Synchronous Write Timing Diagram20Slave Fifo Synchronous Packet End Strobe Slave Fifo Asynchronous WriteSlave Fifo Asynchronous Packet End Strobe Slave Fifo Synchronous Write Sequence and Timing DiagramSlave Fifo Address to Flags/Data Slave Fifo Output EnableSlave Fifo Synchronous Address FIFOADR10 to SLRD/SLWR/PKTEND Setup TimeSlave Fifo Asynchronous Address RD/WR/PKTEND to FIFOADR10 Hold TimeSingle and Burst Synchronous Read Example Sequence Diagram10.17.2 Single and Burst Synchronous Write Slave Fifo Asynchronous Read Sequence and Timing Diagram20 Sequence Diagram of a Single and Burst Asynchronous ReadSlave Fifo Asynchronous Write Sequence and Timing Diagram20 Sequence Diagram of a Single and Burst Asynchronous WriteIdeal for non-battery powered applications Ideal for battery powered applicationsOrdering Information Development Tool KitLead Shrunk Small Outline Package O56 Package DiagramsLead QFN 8 x 8 mm LF56A Pin Thin Plastic Quad Flatpack 14 x 20 x 1.4 mm A100RA Lead Thin Plastic Quad Flatpack 14 x 20 x 1.4 mm A128 Vfbga 5 x 5 x 1.0 mm 0.50 Pitch, 0.30 Ball BZ56 PCB Layout RecommendationsCross-section of the Area Underneath the QFN Package Quad Flat Package No Leads QFN Package Design NotesIssue Orig. Description of Change Date Pyrs Cmcc

CY7C68013A specifications

The Cypress CY7C68013A is a high-performance USB microcontroller that belongs to Cypress's FX2LP family, specifically designed for USB applications. This microcontroller is well-regarded for its versatility, making it a popular choice for developers engaged in USB-enabled projects.

One of the main features of the CY7C68013A is its ability to support USB 2.0, with both high-speed (480 Mbps) and full-speed (12 Mbps) operation. This capability allows developers to take full advantage of the USB interface for data transfer, making it suitable for applications that require fast and efficient data communication. The device integrates a USB controller along with an 8051-compatible microcontroller, providing a seamless interface for USB transactions while also allowing for custom processing tasks.

The CY7C68013A offers 32 KB of internal RAM, which is a valuable resource for data buffering and temporary storage during data transfer operations. Additionally, it includes a programmable 8-bit I/O interface, which can be tailored to various application needs, facilitating control over peripheral devices. The microcontroller also features a 16-bit address bus and a 16-bit data bus, enhancing its ability to interface with external memory and components.

In terms of development, moving from concept to production becomes easier due to the availability of development kits and software support. The CY7C68013A is compatible with Cypress's EZ-USB development environment, which includes APIs and libraries that simplify the coding process. This software support empowers developers to create sophisticated USB-related applications without needing extensive background knowledge in USB protocol intricacies.

Regarding power efficiency, the CY7C68013A operates at low power consumption levels, making it suitable for battery-operated devices. It supports various low-power modes, which further enhances its appeal for portable applications.

Overall, the Cypress CY7C68013A stands out for its robust features, flexibility, and ease of use, making it an ideal choice for engineers working on USB-centric designs. Its combination of high-speed USB functionality, ample internal resources, and strong software support positions it as a go-to microcontroller for a wide variety of applications, ranging from consumer electronics to industrial systems.
Top Page Image Contents