Installation and Operation |
3Type winipcfg.exe and then click OK. The IP Configuration window is displayed:
In Windows 98, IP Autoconfiguration should not be shown before IP address or an error condition exists. An example is shown below.
The values shown for Adapter Address, IP Address, Subnet Mask, and Default Gateway on your PC will be different from those shown in the examples.
If an IP address is not displayed or has all zeros in Windows 95, an error condition exists.
If Autoconfiguration is displayed before IP Address in Windows 98, an error condition exists.
4Select the adapter — the Ethernet card or USB device.
5Click Renew.
6After the system displays an IP address, click OK.