Aiwa NSX-A508 manual To dav all discs in the disc compartment, press, To check the remaining time

DISC CHANGE	\	EDIT/CHECK
		<	RANDOM/
		e	REPEAT
		\

caoo .. -0-9,+10

OOQ 00

00

3: z SHIFT

~

Press CD, then press A OPEN/CLOSE to open the

disc compartment. Load disc(s) with the label side up.

To ~lav one or two discs, placethe discson tray 1 and 2.

To ~lav three discs, press DISC CHANGE to rotatethe trays

after placing two discs. Place the third disc on tray 3. Close the disc compartment,!,by pressing ..A OPEN/CLOSE-.

a~@$~

DISC CHANGE

Tray 1 AEl

w> --<

Tray	number of the
disc	to be played	Total playing time

Total number of tracks

Load discs.

To dav all discs in the disc compartment, press 4>.

Play begins with the disc on tray 1.

Number of track being played Elapsed playing time

To play one disc only, press DISC DIRECT PLAY 1-3.The selected disc is played once.

To stop play, press ■ .

To pause play, press Il. To resume play, press again.

To search for a particular point during playback, keep -

or - pressed and release it at the desired point.

To skip to the beginning of a track during playback, press

<or - repeatedly or turn MULTI JOG. To remove discs, press A OPEN/CLOSE.

To start play when the power is off (Direct Play Function)

Press CD, The power is turned on and play of the loaded disc(s) begins.

When 4 OPEN/CLOSE is pressed, the power is also turned on and the disc compartment is opened.

TO check the remaining time

During play, press EDIT/CHECK on the remote control while pressing SHIFT. The amount of time remaining until all tracks finish playing is displayed. To restore the playing time display, repeat the above.

*CD EDIT/CHECK on the unit is also available instead of EDIT

CHECK on the remote control.

Selecting a track with the remote control

1Press DISC DIRECT PLAY 1-3 to select a disc.

2Press numbered buttons O-9 and +1 O to select a track. Example:

To select the 25th track, press +10, +10 and 5. To select the 10th track, press +10 and O.

The selected track starts to play and continues to the end of that disc.

Replacing discs during play

While one disc is playing, the other discs can be replaced without

interrupting play.

1 Press DISC CHANGE.

2Remove the discs and replace with other discs.

3Press A OPEN/CLOSE to close the disc compartment.

●When loading an 8-cm (3-inch) disc, put it onto the inner circle of the tray.

●Do not place more than one compact disc on one disc tray.

●Do not tilt the unit with discs loaded. Doing so may cause malfunctions.

9 ENGLISH